Car Wraps Surface Preparation & Cleaning 3

Question 1

What is the recommended method for removing old adhesive residue left by a previous wrap before installing a new one?

Accepted Answer

Heat with a heat gun then wipe with adhesive remover

Answer

Sand the surface lightly

Answer

Apply new wrap directly over the residue

Answer

Use acetone only

Question 2

Which type of surface texture presents the greatest challenge for vinyl wrap adhesion?

Accepted Answer

Heavy orange peel or textured/rough paint

Answer

Smooth factory paint

Answer

Lightly polished clear coat

Answer

Flat/matte OEM paint

Question 3

Why is it important to degrease panel edges and door jambs during surface prep, even if they won't be visible in the finished wrap?

Accepted Answer

Wrap edges tuck into these areas and contamination causes lifting

Answer

It improves the color match of the wrap

Answer

Jamb grease can stain the outer vinyl panels

Answer

It is required by wrap manufacturer warranties only

Question 4

What does 'panel bonding' or 'tucking with primer' refer to in wrap preparation?

Accepted Answer

Applying edge primer to help vinyl stick around tight curves and edges

Answer

Using body filler to smooth panels before wrapping

Answer

Bonding two pieces of vinyl together at a seam

Answer

Attaching trim panels back after removal

Question 5

At what point during the surface prep process should you remove trim pieces and badges for a professional wrap job?

Accepted Answer

Before cleaning, so hidden surfaces behind trim are also cleaned

Answer

After the final IPA wipe

Answer

After applying the vinyl to know what to work around

Answer

Only when the customer specifically requests it

Question 6

Which type of paint defect must be repaired before wrapping because vinyl will make it more visible, not less?

Accepted Answer

Deep scratches, chips, and rust

Answer

Light swirl marks

Answer

Minor water spots

Answer

Fine buffer trails