C2 Safety and Compliance 2

Question 1

Under OSHA's Hazard Communication Standard (HazCom), how many sections must a compliant Safety Data Sheet (SDS) contain?

Accepted Answer

16

Answer

OSHA's HazCom Standard requires SDS documents to have exactly 16 standardized sections aligned with the GHS format.

Question 2

An employer discovers that a chemical used in their facility does not have an SDS on file. What is the FIRST action they must take?

Accepted Answer

Contact the manufacturer or supplier to obtain an SDS

Answer

The employer must immediately request an SDS from the manufacturer or supplier to ensure workers have access to hazard information.

Question 3

Which OSHA standard specifically governs the control of hazardous energy (lockout/tagout) in the workplace?

Accepted Answer

29 CFR 1910.147

Answer

29 CFR 1910.147 is the OSHA standard for the Control of Hazardous Energy, commonly known as the Lockout/Tagout (LOTO) standard.

Question 4

A worker is injured on the job and misses three days of work. Under OSHA recordkeeping rules, this incident must be recorded on which form?

Accepted Answer

Both OSHA Form 300 and Form 301

Answer

A recordable injury requiring days away from work must be entered on both the OSHA 300 Log and the OSHA 301 Incident Report.

Question 5

What is the primary purpose of a Job Hazard Analysis (JHA)?

Accepted Answer

To identify and control hazards associated with specific job tasks before work begins

Answer

A JHA proactively identifies hazards in each step of a job task so that controls can be implemented before workers are exposed.

C2 Practice Test