Building Information Modeling BIM Standards and Level of Development 1

Question 1

What does LOD stand for in US BIM practice as defined by BIMForum?

Accepted Answer

Level of Development

Answer

In US BIM practice, BIMForum defines LOD as 'Level of Development,' encompassing both geometric detail and attached non-graphic information.

Question 2

At LOD 300, what can a BIM element's geometry be used for?

Accepted Answer

Accurate quantity takeoffs and coordination

Answer

LOD 300 elements have specific geometry suitable for generating accurate quantities and performing clash detection coordination.

Question 3

Which US organization publishes the LOD Specification used as an industry reference?

Accepted Answer

BIMForum

Answer

BIMForum publishes and maintains the LOD Specification, which defines what model authors can and cannot infer from BIM elements at each LOD.

Question 4

What is the primary difference between LOD 350 and LOD 300?

Accepted Answer

LOD 350 includes interfaces with other systems for coordination

Answer

LOD 350 adds system interfaces and connections to the LOD 300 level of geometric accuracy, enabling more precise trade coordination.

Question 5

Which AIA document establishes BIM protocols and defines model element authorship on US projects?

Accepted Answer

AIA E203 and G202

Answer

AIA E203 (BIM and Digital Data Protocol) and G202 (Project BIM Protocol) together define BIM requirements and model element authorship responsibilities.

Building Information Modeling Practice Test

Building Information Modeling Practice Test

Building Information Modeling BIM Standards and Level of Development 1