Boating Certification Test Safety Equipment & Gear 3

Question 1

What is the primary purpose of a bilge pump on a recreational boat?

Accepted Answer

To remove accumulated water from the hull's lowest point

Answer

A bilge pump removes water that collects in the bilge — the lowest interior part of the hull — preventing swamping.

Question 2

A sound-producing device is federally required on vessels of what length?

Accepted Answer

Vessels 12 meters (39.4 feet) or longer

Answer

COLREGS and USCG regulations require vessels 12 meters or longer to carry a whistle or horn and a bell.

Question 3

Which personal flotation device type is designed to turn an unconscious wearer face-up in rough water?

Accepted Answer

Type II

Answer

Type II PFDs are designed to turn most unconscious wearers face-up and are recommended for inland waters with quick rescue response.

Question 4

How should a CO (carbon monoxide) detector be positioned on a boat?

Accepted Answer

High on the wall, near the ceiling

Answer

Carbon monoxide is slightly lighter than air and rises, so detectors should be mounted high where CO accumulates.

Question 5

What is the correct ratio of anchor line (scope) to water depth recommended for secure anchoring in normal conditions?

Accepted Answer

5:1 to 7:1 (five to seven feet per foot of depth)

Answer

A scope of 5:1 to 7:1 is recommended to keep the anchor chain nearly horizontal for maximum holding power.

Boating Certification Test Practice Test