Cleaning and Sanitizing Flashcards
6 cards from real FOODSAFE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Cleaning and Sanitizing flashcards as text
What personal protective equipment (PPE) should a food handler wear when using concentrated cleaning chemicals?
Answer: Chemical-resistant gloves, eye protection, and possibly an apron as specified on the product SDS
Concentrated cleaning chemicals can cause skin burns, eye damage, and respiratory issues. The SDS for each product specifies required PPE, typically including chemical-resistant gloves, splash-proof eye protection, and protective clothing.
What is the proper way to clean a cutting board that has deep cuts and grooves?
Answer: Replace the cutting board, as deep grooves harbour bacteria that cannot be reached by cleaning and sanitizing
Deep cuts and grooves in cutting boards trap food particles and bacteria that regular cleaning and sanitizing cannot reach. This creates a persistent source of contamination. Cutting boards with excessive wear must be replaced.
What is the correct procedure for cleaning a food preparation area at the end of a shift?
Answer: Remove all food, scrape surfaces, wash with hot soapy water, rinse, sanitize all food-contact surfaces, clean non-food-contact surfaces, sweep and mop floors, and take out garbage
End-of-shift cleaning is comprehensive: all food is stored properly, surfaces are cleaned top to bottom (food-contact surfaces sanitized), floors are swept and mopped, garbage is removed, and cleaning tools are stored properly.
How often should grease filters in kitchen exhaust hoods be cleaned?
Answer: At least weekly, or more frequently in high-volume operations, to prevent grease buildup that creates fire and hygiene hazards
Grease filters should be cleaned at least weekly to prevent grease accumulation, which is both a fire hazard and a hygiene concern. Heavy grease buildup can drip onto food and surfaces below, causing contamination.
What is the role of a pre-rinse or pre-scrape step before washing dishes?
Answer: Removing large food particles prevents clogging the dishwasher, keeps wash water cleaner longer, and ensures the wash cycle is more effective
Pre-scraping removes large food particles that would otherwise contaminate wash water, clog dishwasher screens, and reduce cleaning effectiveness. It extends the life of wash water and ensures proper sanitization.
What should be included in a sanitizing logbook for a food service operation?
Answer: Date and time, what was cleaned and sanitized, sanitizer concentration reading, who performed the task, and any corrective actions taken
A thorough sanitizing log documents when cleaning occurred, what was addressed, the verified sanitizer concentration, who was responsible, and any issues found. This demonstrates due diligence and helps identify patterns or gaps.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- openschool.bc.ca — Exam format, exam information · verified Oct 2026
- foodsafe.ca — Fees, passing score, score release, test delivery, time limit, score validity, exam information · verified Oct 2026