Audi TT Audi TT Body and Interior Systems 1

Question 1

What type of roof mechanism does the Audi TT Roadster (MkII) use for its retractable soft top?

Accepted Answer

Electro-hydraulic power soft top

Answer

The Audi TT Roadster MkII uses an electro-hydraulic system with a pump and actuator cylinders to raise and lower the soft top.

Question 2

On the Audi TT, what component prevents moisture from entering the cabin when the soft top is lowered?

Accepted Answer

Tonneau cover with integrated weatherstrip

Answer

The tonneau cover, which folds over the stowed soft top, includes a weatherstrip that seals against the body to prevent water intrusion.

Question 3

A technician finds the Audi TT convertible soft top stops mid-cycle and will not complete the closing sequence. What is the first diagnostic step?

Accepted Answer

Check for fault codes in the convertible top control module via VCDS

Answer

Scanning the convertible top control module with VCDS will reveal position sensor or limit switch faults that cause mid-cycle stops.

Question 4

What material is used for the Audi TT MkII Roadster soft top fabric?

Accepted Answer

Multi-layer SONNENLAND or Twillfast fabric with acoustic layer

Answer

The Audi TT Roadster soft top uses a multi-layer fabric (such as SONNENLAND or Twillfast) with an acoustic insulation layer to reduce wind and road noise.

Question 5

When replacing the Audi TT door window regulator, what must be done before removing the door panel?

Accepted Answer

Disconnect the battery and wait 30 minutes for airbag capacitors to discharge

Answer

The door contains a side curtain airbag; disconnecting the battery and waiting 30 minutes allows airbag capacitors to discharge before removing the panel.

Audi TT - Certified Audi TT Specialist Practice Test

Audi TT - Certified Audi TT Specialist Practice Test

Audi TT Audi TT Body and Interior Systems 1