Audi TT Suspension and Steering

Question 1

What diagnostic procedure is fundamental to suspension and steering?

Accepted Answer

Systematic diagnostic process using scan tools, visual inspection, and test procedures

Answer

Replacing parts until the problem stops

Answer

Asking the customer what they think is wrong

Answer

Starting with the most expensive repair

Question 2

What safety precaution is critical when performing suspension and steering work?

Accepted Answer

Following all manufacturer safety warnings, using proper PPE, and securing the vehicle

Answer

Safety precautions slow down work

Answer

Safety is only important for major repairs

Answer

Experienced technicians don't need safety precautions

Question 3

How should suspension and steering repairs be documented?

Accepted Answer

Complete documentation including findings, repairs performed, parts used, and recommendations

Answer

Verbal communication with the customer is sufficient

Answer

Documentation is only needed for warranty work

Answer

Take photos only

Question 4

What environmental regulation applies to suspension and steering?

Accepted Answer

Proper handling and disposal of fluids, refrigerants, and hazardous materials as required by EPA regulations

Answer

Environmental rules don't apply to auto repair

Answer

Environmental compliance is optional for small shops

Answer

Only diesel shops need to follow environmental rules

Question 5

How should a technician verify a suspension and steering repair is complete?

Accepted Answer

Perform a thorough road test, recheck all work, and verify with diagnostic tools

Answer

If the warning light is off, the repair is complete

Answer

Ask the customer if they notice a difference

Answer

Check only the specific component that was repaired

Question 6

What manufacturer specification must be followed in suspension and steering?

Accepted Answer

Follow all manufacturer torque specs, fluid types, and procedures as specified in service information

Answer

Specifications are suggestions, not requirements

Answer

Use aftermarket specifications for all repairs

Answer

Experienced technicians can estimate specifications