DKT Road Signs and Signals

Question 1

You are approaching a STOP sign at an intersection. What must you do?

Accepted Answer

Come to a complete stop and give way to all traffic before proceeding

Answer

A STOP sign means you must come to a complete stop at the stop line (or before the intersection if there is no line) and give way to all traffic before you proceed. Slowing down is not enough.

Question 2

A red traffic signal at an intersection means:

Accepted Answer

You must stop and remain stopped until the light turns green

Answer

A red light means stop. You must stop behind the stop line and wait until the signal turns green before entering the intersection, unless a left-turn-on-red sign permits otherwise.

Question 3

What does a yellow (amber) traffic light mean?

Accepted Answer

Stop if you can do so safely; the light is about to turn red

Answer

A yellow light means stop if it is safe to do so. It warns that the signal is about to turn red. You may only continue through if stopping would be dangerous.

Question 4

A regulatory sign with a red circle and a red diagonal line through a symbol means:

Accepted Answer

The action shown is prohibited

Answer

A red circle with a diagonal line (for example, no right turn or no parking) is a prohibition sign. It tells you that the action shown in the symbol is not allowed.

Question 5

A diamond-shaped yellow sign with black symbols is used to:

Accepted Answer

Warn you of hazards or changes in road conditions ahead

Answer

Yellow diamond-shaped signs are warning signs. They alert you to hazards ahead such as a curve, crossing, school zone or merging traffic so you can adjust your driving.

Driver Knowledge Test (DKT) Practice Test

Driver Knowledge Test (DKT) Practice Test

DKT Road Signs and Signals