ATV Safety Institute (ASI) ATV RiderCourse Knowledge Assessment — Questions and Answers

Question 1: What should riders do when approaching a blind corner on a narrow trail?

Ride on the left side to gain early visibility
Slow down, stay right, and sound the horn to warn oncoming riders (Correct answer)
Accelerate to pass through quickly
Maintain speed and lean into the corner

Correct answer: Slow down, stay right, and sound the horn to warn oncoming riders

Slowing at blind corners and signaling your presence prevents head-on collisions with unseen oncoming riders.

Question 2: Which of the following is a common legal requirement for ATV registration when riding on public lands?

The ATV must be registered, and the registration decal must be properly displayed on the vehicle. (Correct answer)
An ATV purchased from an out-of-state dealer is exempt from local registration for five years.
Registration is only required for ATVs used for commercial purposes.
Registration with a federal agency is required, superseding any state requirements.

Correct answer: The ATV must be registered, and the registration decal must be properly displayed on the vehicle.

Most states and public land management agencies require ATVs to be registered, and proof of registration, such as a decal or plate, must be visibly affixed to the vehicle. Registration is typically handled at the state level.

Question 3: If you are using a helmet without a built-in face shield, what is the most appropriate form of eye protection?

A baseball cap worn under the helmet
Tinted sunglasses
Prescription eyeglasses
Shatter-resistant goggles that form a seal around the eyes (Correct answer)

Correct answer: Shatter-resistant goggles that form a seal around the eyes

Goggles are essential when using a helmet without a face shield because they form a seal to protect the eyes from wind, dust, insects, and flying debris like rocks or branches. Regular eyeglasses and sunglasses do not provide adequate protection from impacts or debris from the sides.

Question 4: A 'quad sport' ATV differs from a 'sport quad racer' primarily in that it is:

Equipped with a roll cage for passenger safety
Built with a larger fuel tank for longer rides
Designed for recreational trail use rather than closed-course racing (Correct answer)
Street legal and equipped with turn signals

Correct answer: Designed for recreational trail use rather than closed-course racing

Quad sport ATVs are tuned for recreational trail riding, while sport quad racers are purpose-built competition machines optimized for closed-course events.

Question 5: An ATV classified as 'adult-sized' typically has an engine displacement of at least:

50cc
90cc
70cc
90cc or greater (Correct answer)

Correct answer: 90cc or greater

Adult-sized ATVs are generally defined as those with engines of 90cc or larger, which produce enough power that they are considered unsafe for children under 16.

Question 6: Why should you avoid riding an ATV through water that is deeper than the recommended level specified in your owner's manual?

The ATV floats and becomes unsteerable
Water can enter the engine and air intake, causing hydrolocking or severe damage (Correct answer)
Deep water will rust the frame immediately
Deep water causes tires to over-inflate

Correct answer: Water can enter the engine and air intake, causing hydrolocking or severe damage

Water ingested into the engine can cause hydrolocking, a condition where incompressible water stops the engine and causes serious internal damage.

Question 7: When riding in a group and you want to signal that there is a hazard ahead, what is the common hand signal?

Wave both arms rapidly over your head
Extend your left arm straight out horizontally
Extend your left arm and point toward the hazard or tap your helmet (Correct answer)
Point your right arm straight up

Correct answer: Extend your left arm and point toward the hazard or tap your helmet

Pointing toward a hazard or tapping your helmet is a common signal to alert following riders of a specific danger ahead.

Question 8: Which ATV class is specifically designed and marketed for competitive motocross and cross-country racing events?

Sport/racing quad (Correct answer)
Side-by-side UTV
Utility ATV
Youth recreation ATV

Correct answer: Sport/racing quad

Sport/racing quads are purpose-built competition machines with lightweight frames, high-performance engines, and aggressive suspension tuned for race tracks and cross-country courses.

Question 9: When executing a turn on an ATV, what is the correct body positioning to maintain balance and control?

Shift your weight to the inside foot peg and lean your body away from the turn.
Stand up on the foot pegs and lean your entire body as far as possible to the outside of the turn.
Lean your upper body in the direction of the turn while shifting your body weight to the outside foot peg. (Correct answer)
Remain seated and centered on the ATV, using only the handlebars to steer.

Correct answer: Lean your upper body in the direction of the turn while shifting your body weight to the outside foot peg.

To properly turn an ATV, the rider must actively use their body weight. Leaning your upper body into the turn and applying pressure to the outside foot peg helps to counterbalance the centrifugal force, maintaining traction and stability throughout the turn.

Question 10: What communication device is commonly recommended for large group ATV rides in areas without cell service?

Two-way (FRS/GMRS) radios or helmet communicators (Correct answer)
Standard cell phones on speaker
Coded flag signals mounted to helmets
Satellite navigation devices with messaging

Correct answer: Two-way (FRS/GMRS) radios or helmet communicators

Two-way radios or helmet-mounted communicators allow instant communication between group members even in areas with no cellular coverage.

Question 11: You are riding up a moderately steep hill and realize you have lost all forward momentum and cannot proceed. What is the first step in the correct procedure to safely turn the ATV around?

Shift your weight to the downhill side and attempt a wide turn.
Allow the ATV to roll backward slowly while steering.
Apply both brakes to stop, set the parking brake, and dismount on the uphill side. (Correct answer)
Immediately turn the handlebars sharply downhill and accelerate.

Correct answer: Apply both brakes to stop, set the parking brake, and dismount on the uphill side.

If you stall while climbing a hill, the first priority is to secure the vehicle. Apply both brakes to stop all movement, engage the parking brake, and then dismount on the uphill side to prevent being caught under the ATV if it were to tip. Never allow the ATV to roll backward uncontrolled.

Question 12: You are riding on a remote trail when your throttle suddenly sticks, causing the engine to race at full speed. What is the safest and most immediate action to take?

Use the engine cut-off switch (kill switch) to shut down the engine immediately. (Correct answer)
Apply both front and rear brakes as hard as possible to overpower the engine.
Attempt to unstick the throttle by rapidly twisting it back and forth.
Shift the ATV into neutral and coast to a stop.

Correct answer: Use the engine cut-off switch (kill switch) to shut down the engine immediately.

In a stuck-throttle emergency, the most critical action is to immediately cut power to the engine. The engine cut-off switch is designed for this exact purpose, providing the fastest and most reliable way to stop the ATV from accelerating out of control. Applying brakes might be insufficient against a full-throttle engine, and shifting to neutral or fiddling with the throttle wastes precious time.

Question 13: Your ATV has overturned on a steep, off-camber trail. Before attempting to right the vehicle, what is the most critical safety check to perform?

Ensure the ATV is in neutral.
Check for and address any fuel leaks. (Correct answer)
Confirm that your tow strap is securely attached.
Position yourself on the uphill side of the ATV.

Correct answer: Check for and address any fuel leaks.

A hot engine and a potential fuel leak create a significant fire hazard. Before attempting to move or right the ATV, you must check for leaking fuel. While positioning yourself uphill is the correct technique for lifting, addressing a fire risk is the more critical initial safety step.

Question 14: What is a footrest on an All Terrain Vehicle (ATV)?

The handlebars used for steering the ATV
The part of the ATV where the rider places their feet while riding
The horizontal bar or platform, also known as a foot peg or floorboard (Correct answer)
The mechanism for adjusting the ATV's suspension

Correct answer: The horizontal bar or platform, also known as a foot peg or floorboard

Explanation: <br> A footrest on an ATV refers to the horizontal bar or platform where the rider places their feet while riding. It provides stability and comfort for the rider during off-road adventures.

Question 15: While riding, you spot several deer ahead on the trail. They seem calm but are aware of you. What is the most responsible action to take?

Honk your horn or rev your engine to frighten them away from the trail for their safety.
Stop your ATV, turn off the engine if necessary, and wait for the animals to move away on their own. (Correct answer)
Slowly continue riding directly toward them, forcing them to move.
Speed up to pass them quickly before they have a chance to run.

Correct answer: Stop your ATV, turn off the engine if necessary, and wait for the animals to move away on their own.

The proper etiquette when encountering wildlife is to observe from a distance and avoid causing stress or altering their natural behavior. Stopping and waiting allows the animals to move on calmly and reduces the risk of a panicked reaction that could be dangerous for both the wildlife and the rider.

Question 16: Under what specific condition is it generally permissible to carry a passenger on an ATV?

When traveling at speeds under 10 mph on a private trail.
Only if the operator is over 21 years of age.
If the passenger is a minor under the direct supervision of an adult operator.
When the ATV is specifically designed and manufactured to carry a passenger. (Correct answer)

Correct answer: When the ATV is specifically designed and manufactured to carry a passenger.

Most state laws and safety guidelines strictly prohibit carrying passengers on an ATV unless it has been specifically designed by the manufacturer for that purpose, with a designated seat and handholds for the passenger.

Question 17: Which of the following is a key risk management step before every ATV ride?

Only checking tire pressure once a month
Skipping the inspection if the last ride was problem-free
Inspecting the ATV every 100 hours of riding
Performing a pre-ride inspection of brakes, tires, throttle, and fluid levels (Correct answer)

Correct answer: Performing a pre-ride inspection of brakes, tires, throttle, and fluid levels

A pre-ride inspection catches developing mechanical problems before they cause a failure on the trail where help is not nearby.

Question 18: Under which of the following conditions do most accidents involving children occur?

Operating a vehicle that is too large to control (Correct answer)
Operating on forested trails
Operating in a group
Operating under direct adult supervision

Correct answer: Operating a vehicle that is too large to control

Explanation: <br> Most accidents involving children occur when they are operating a vehicle that is too large for them to control. Children may lack the physical strength and coordination needed to safely handle larger ATVs, increasing the risk of accidents. It's essential to ensure that children use appropriately sized vehicles.

Question 19: What special precaution should you take when riding on frozen or icy terrain?

Inflate tires to the highest pressure
Use maximum throttle to power through slick spots
Reduce speed drastically and avoid sudden inputs (Correct answer)
Lock the front differential for better control

Correct answer: Reduce speed drastically and avoid sudden inputs

Ice dramatically reduces traction, so slow speeds and smooth, gradual inputs prevent skidding and loss of control.

Question 20: Which ATV drivetrain configuration provides power to all four wheels simultaneously?

FWD
2WD
4WD (4x4) (Correct answer)
AWD locked differential

Correct answer: 4WD (4x4)

A 4WD (4x4) ATV delivers engine power to all four wheels, improving traction on muddy, sandy, or rough terrain.

Question 21: Why is it dangerous for two people to ride a single-rider ATV?

A passenger shifts the center of gravity and alters handling, increasing rollover risk (Correct answer)
Only licensed passengers are unsafe
Passengers improve stability by adding weight
The risk only applies to youth ATVs

Correct answer: A passenger shifts the center of gravity and alters handling, increasing rollover risk

Single-rider ATVs are engineered and balanced for one occupant; a passenger changes weight distribution and can interfere with operator control.

Question 22: If your ATV begins to sink in mud or bog, what is the best immediate action?

Rock the ATV violently side to side
Apply steady, consistent throttle without spinning wheels excessively (Correct answer)
Increase throttle rapidly to maximum power
Shut the engine off immediately

Correct answer: Apply steady, consistent throttle without spinning wheels excessively

Steady throttle keeps momentum without digging the tires deeper, giving you the best chance to drive out.

Question 23: Side-by-side UTVs designed for agriculture and ranching are most likely to include which specialized feature?

A hydraulic dump bed for unloading materials (Correct answer)
A two-stroke racing engine
Knobby street tires
A passenger roll bar that folds flat

Correct answer: A hydraulic dump bed for unloading materials

Agricultural UTVs commonly feature a hydraulic dump bed that can be raised to unload soil, gravel, feed, or other materials without manual labor.

Question 24: Which type of terrain presents the greatest risk of ATV rollover?

Steep side-slopes (traversing hillsides) (Correct answer)
Packed gravel roads
Flat open fields
Shallow water crossings

Correct answer: Steep side-slopes (traversing hillsides)

Traversing steep side-slopes shifts the ATV's center of gravity and dramatically increases rollover risk.

Question 25: What is the purpose of the 'buddy system' when ATV riding in remote areas?

Ensuring someone can get help or provide assistance if an accident occurs (Correct answer)
Sharing fuel between ATVs on long rides
Making trails more crowded so you are never alone
Competing with another rider for faster lap times

Correct answer: Ensuring someone can get help or provide assistance if an accident occurs

Riding with a buddy means someone is present to call for help, perform first aid, or go for assistance if you are injured in a remote location.

Question 26: What is the biggest hazard when riding through deep mud on an ATV?

Mud clogging the exhaust pipe immediately
Tire pressure dropping too low
The ATV becoming stuck or bogged down (Correct answer)
Overheating due to reduced airflow to the engine

Correct answer: The ATV becoming stuck or bogged down

Deep mud can trap an ATV quickly, and getting stuck in a remote location poses a significant safety risk.

Question 27: What is the primary risk factor associated with operating an ATV under the influence of alcohol?

Impaired judgment and delayed reaction time greatly increase crash risk (Correct answer)
Alcohol improves balance and confidence on the ATV
Only speed matters, not sobriety
Alcohol only affects four-wheel vehicles, not ATVs

Correct answer: Impaired judgment and delayed reaction time greatly increase crash risk

Alcohol impairs the cognitive and physical reflexes needed to safely respond to terrain hazards, making crashes far more likely.

Question 28: Which of the following items is considered LEAST critical for a basic ATV survival kit on a day trip in a remote area?

A multi-tool and tire plug kit.
A first-aid kit and emergency blanket.
A portable GPS navigation unit. (Correct answer)
Extra water and high-energy snacks.

Correct answer: A portable GPS navigation unit.

While a GPS is extremely useful, it is the least critical compared to the other items. A first-aid kit addresses injuries, water/food address basic biological needs, and a tool/tire kit addresses mechanical failures that could leave you stranded. A GPS can fail due to battery loss or signal issues, which is why a map and compass are often recommended as a non-electronic backup.

Question 29: When riding in dusty desert conditions, what maintenance item requires the most frequent attention?

Brake fluid level
Air filter (Correct answer)
Spark plugs
Coolant level

Correct answer: Air filter

Desert dust quickly clogs air filters, restricting airflow to the engine and causing performance loss or engine damage.

Question 30: Utility ATVs typically feature which engine characteristic compared to sport ATVs?

Two-stroke engines for lightweight performance
Higher torque output at lower RPMs for pulling power (Correct answer)
Smaller displacement for fuel efficiency
Higher RPM redline for top speed

Correct answer: Higher torque output at lower RPMs for pulling power

Utility ATVs prioritize low-end torque so they can tow trailers, pull plows, and haul cargo at low speeds without stalling.

Question 31: A rider is preparing for a trip on rough, rocky terrain. During the pre-ride check of the tires and wheels, what is MOST important to confirm besides proper air pressure?

The tread is filled with dirt from the last ride for extra grip.
Axle nuts are tight and wheel nuts are torqued to specification. (Correct answer)
The tires have been polished for better mud shedding.
The valve stems are perfectly aligned with the brand logo.

Correct answer: Axle nuts are tight and wheel nuts are torqued to specification.

While tire pressure is vital, the harshness of off-road environments, especially rocky terrain, can loosen components. Verifying that axle nuts are tight (and secured with cotter pins if applicable) and that all wheel nuts are torqued correctly is crucial to prevent a wheel from becoming loose or detaching, which would lead to a loss of control.

Question 32: What is the recommended approach when your ATV encounters an unexpected patch of loose gravel on a turn?

Lean sharply into the inside of the turn
Release the throttle smoothly and look through the turn (Correct answer)
Apply the brakes hard to scrub speed
Accelerate through to maintain momentum

Correct answer: Release the throttle smoothly and look through the turn

Smooth throttle release and looking through the turn allows the ATV to track naturally while minimizing the risk of a slide.

Question 33: What is the purpose of the engine stop switch on an All Terrain Vehicle (ATV)?

To turn off the engine quickly without removing the hands from the handlebars (Correct answer)
To engage the brakes
To control the ATV's speed
To adjust the engine's fuel mixture

Correct answer: To turn off the engine quickly without removing the hands from the handlebars

Explanation: <br> The engine stop switch on an ATV allows the rider to quickly shut off the engine without needing to remove their hands from the handlebars. This feature enhances safety by providing a convenient way to stop the ATV in emergencies or when needed.

Question 34: Which ATV configuration typically offers the greatest lateral stability on uneven terrain?

Single-rear-wheel sport ATV
Three-wheeled ATV
Sport ATV with narrow stance
Side-by-side UTV with wide track width (Correct answer)

Correct answer: Side-by-side UTV with wide track width

Side-by-side UTVs have a wide track width and a low center of gravity, making them inherently more resistant to rollovers than narrower ATVs.

Question 35: What riding technique helps prevent tipping when traversing a slope with a sidehill lean?

Shift body weight downhill to lower the center of gravity
Keep body weight perfectly centered over the seat
Lean the upper body into the slope while keeping hips uphill
Shift body weight uphill to counterbalance the ATV's lean (Correct answer)

Correct answer: Shift body weight uphill to counterbalance the ATV's lean

Shifting your body weight uphill counteracts the gravitational pull that tries to tip the ATV downhill.

Question 36: What does 'CVT' stand for in the context of ATV transmissions, and what is its main advantage?

Clutch Valve Torque — reduces clutch wear
Central Variable Torque — distributes power between axles
Counter-Vented Throttle — improves airflow at high RPMs
Continuously Variable Transmission — provides seamless acceleration without fixed gear steps (Correct answer)

Correct answer: Continuously Variable Transmission — provides seamless acceleration without fixed gear steps

A CVT (Continuously Variable Transmission) uses a belt and pulley system to provide infinite gear ratios, delivering smooth, uninterrupted power across all speeds.

Question 37: What does the designation '4x2' mean when describing an ATV's drivetrain?

Four-speed transmission, two-cylinder engine
Four wheels total, two wheels driven (Correct answer)
Four-wheel steering, two-wheel braking
Four wheels, two-stroke engine

Correct answer: Four wheels total, two wheels driven

A 4x2 drivetrain means the vehicle has four wheels but only two of them (typically the rear) receive engine power.

Question 38: What is the correct response when your ATV's throttle sticks in the open position?

Keep riding and steer to a safe stop
Shift to neutral and let the engine rev
Only use the rear brake to avoid flipping
Hit the engine kill switch immediately and apply the brakes (Correct answer)

Correct answer: Hit the engine kill switch immediately and apply the brakes

The engine kill switch instantly cuts power, stopping runaway acceleration while brakes bring the ATV to a safe halt.

Question 39: Why must ATV operators be careful and AVOID riding over vegetation?

Vegetation stains the underside of the vehicle
There is no reason to avoid riding on vegetation
Uprooting vegetation causes permanent damage (Correct answer)
Some plants will cause damage to the tires

Correct answer: Uprooting vegetation causes permanent damage

Explanation: <br> ATV operators should avoid riding over vegetation because it can uproot and permanently damage plants, leading to soil erosion and habitat destruction. Preserving vegetation is essential for maintaining the ecological balance and preventing environmental degradation.

Question 40: Which of the following represents the most immediate and life-threatening danger if your ATV breaks down during a ride in cold, wet, and windy conditions?

Dehydration
Running out of food
Hypothermia (Correct answer)
Getting lost

Correct answer: Hypothermia

Hypothermia is a rapid and dangerous drop in core body temperature caused by exposure to cold, wet, and windy conditions. It can set in very quickly and become life-threatening far sooner than the effects of dehydration or lack of food. While getting lost is a serious problem, hypothermia is the most immediate physiological threat.

Question 41: What is the best action to take if your ATV begins to tip sideways on a hillside?

Jump clear of the ATV to the uphill side (Correct answer)
Stay seated and hold on tightly
Lean further downhill to counterbalance
Accelerate to drive out of the tip

Correct answer: Jump clear of the ATV to the uphill side

Jumping to the uphill side puts you away from the ATV's rollover path, preventing it from landing on you.

Question 42: Why is it especially dangerous to ride an ATV on a beach near the surf line?

Ocean spray shorts out the electrical system immediately
Wet sand near the surf can be deceptively soft and can swallow tires rapidly (Correct answer)
Salt water corrodes brake pads instantly
Surf creates a current that pulls ATVs into the water

Correct answer: Wet sand near the surf can be deceptively soft and can swallow tires rapidly

Sand saturated with water near the surf line loses load-bearing capacity quickly, and ATVs can sink and become stuck with little warning.

Question 43: The ATV Safety Institute recommends the 'T-CLOC' checklist for pre-ride inspections. What does the 'C' in T-CLOC stand for?

Controls and Cables (Correct answer)
Chassis and Chain
Coolant and Carburetor
Clutch and Crankcase

Correct answer: Controls and Cables

In the T-CLOC acronym, 'T' stands for Tires and Wheels, 'C' stands for Controls and Cables, 'L' for Lights and Electrics, 'O' for Oil and Fuel, and the final 'C' for Chain/Driveshaft and Chassis.

Question 44: Which of the following is the most significant risk associated with having too little tongue weight when towing a trailer with an ATV?

Steering will become heavy and difficult to control.
The ATV's rear suspension may be overloaded, causing damage.
The trailer may become unstable and sway from side to side at moderate speeds. (Correct answer)
It will cause excessive wear on the ATV's rear tires.

Correct answer: The trailer may become unstable and sway from side to side at moderate speeds.

Tongue weight, the downward force on the hitch, is critical for stability. Too little tongue weight (less than 10% of the total trailer weight) can cause the trailer to become unstable and sway dangerously, leading to a loss of control.

Question 45: When riding on a snow-covered trail, what hazard is often concealed beneath the snow?

Open water channels
Only loose gravel
Soft sand patches
Rocks, stumps, logs, and drop-offs (Correct answer)

Correct answer: Rocks, stumps, logs, and drop-offs

Snow hides solid obstacles like rocks and stumps as well as sudden terrain drops, making reduced speed essential.

Question 46: A 14-year-old wants to ride their ATV on public land. In many jurisdictions, which of the following is a mandatory prerequisite for this activity?

The rider must own the ATV they are operating.
The rider must be accompanied by at least two adults.
Successful completion of a state-approved ATV safety course. (Correct answer)
The ATV's engine size must be greater than 250cc.

Correct answer: Successful completion of a state-approved ATV safety course.

Many states require young operators, typically those under 16 or 18, to complete and pass a certified ATV safety course before they are legally allowed to ride on public lands, sometimes in addition to adult supervision requirements.

Question 47: Why should you avoid riding an ATV on paved roads whenever possible?

ATV tires lack proper grip on pavement, especially in turns (Correct answer)
ATVs accelerate too slowly on pavement
Pavement is too soft for ATV tires
Paved roads increase fuel efficiency too much

Correct answer: ATV tires lack proper grip on pavement, especially in turns

ATV tires are designed for off-road terrain and provide poor lateral grip on pavement, greatly increasing rollover risk in turns.

Question 48: How many wheels does a standard ATV (quad) have?

2
3
4 (Correct answer)
6

Correct answer: 4

A standard ATV has four wheels, which is why it is commonly called a 'quad' or 'four-wheeler.'

Question 49: During a pre-ride inspection, which of the following indicates a potential issue with the ATV's hydraulic brake system?

The brake fluid in the reservoir is clear and at the 'Full' mark.
The brake lever feels 'spongy' or travels almost to the handlebar before engaging. (Correct answer)
The brake lever feels firm and engages with minimal travel.
The brake pads have more than 1/8 inch (3mm) of friction material remaining.

Correct answer: The brake lever feels 'spongy' or travels almost to the handlebar before engaging.

A 'spongy' or soft feeling in the brake lever is a primary indicator of air in the hydraulic lines or a potential fluid leak. This condition significantly reduces braking power and must be addressed before riding. A properly functioning system should feel firm.

Question 50: For a chain-driven ATV, what is the primary purpose of regularly cleaning and lubricating the drive chain?

To cool the engine more effectively
To reduce friction and prevent premature wear of the chain and sprockets (Correct answer)
To ensure the headlights remain bright
To prevent the tires from losing traction

Correct answer: To reduce friction and prevent premature wear of the chain and sprockets

The drive chain and sprockets are under constant stress. Regular cleaning removes abrasive dirt and grit, while proper lubrication reduces friction between the chain's moving parts and the sprocket teeth. This minimizes wear and significantly extends the life of these critical drivetrain components.

ATV Safety Institute (ASI) ATV RiderCourse Knowledge Assessment

The ATV Safety Institute knowledge assessment tests riders on essential ATV safety principles including vehicle types and operation, terrain navigation, maintenance, cargo handling, and accident prevention. Required for ATV safety certification in many US states.

Questions

90 min

Time Limit

80%

To Pass

Checking for saved progress...

Exam Rules

You can skip questions and return to them later
Flag questions for review before submitting
No feedback shown until you submit the entire exam
Unanswered questions count as wrong — answer everything
10 pretest questions are mixed in and don't affect your score
Timer auto-submits when time runs out
Your progress is auto-saved every 30 seconds