ATT Study Guide 2026

Everything you need to pass the ATT exam in one place: the exam format, every topic to study, real practice questions with explanations, flashcards, and full-length practice tests. Free, no sign-up needed.

ATT exam key facts

  • ACI allows a maximum of two hours to complete each Aggregate Testing Technician written exam. Source
  • ACI Aggregate Testing Technician certification is valid for five years from the date all certification requirements are completed. Source
Start the Timed ATT Mock Exam →

📋 ATT Exam Format at a Glance

100
Questions
120 min
Time Limit
70.00%
Passing Score

📚 ATT Topics to Study (33)

✍️ Sample ATT Questions & Answers

1. Which ASTM standard governs the Organic Impurities in Fine Aggregates for Concrete test?
✓ ASTM C40

ASTM C40 is the standard test method for organic impurities in fine aggregates for concrete.

2. When sampling freshly mixed concrete at a job site for aggregate content verification, which standard governs obtaining the composite sample of fresh concrete?
✓ ASTM C172

ASTM C172 covers sampling freshly mixed concrete, from which aggregate-related tests such as unit weight and air content are then performed.

3. What is the significance of the 'increment' in aggregate sampling terminology?
✓ A single portion of material collected in one operation that is combined with others to form the field sample

An increment is one individual scoop or cut of material; multiple increments are combined to create the composite field sample used for testing.

4. When determining fine aggregate specific gravity by ASTM C128, the pycnometer is filled with water to what level after adding the aggregate?
✓ The calibration mark on the neck

The pycnometer is filled to its calibration mark to ensure a known, reproducible water volume.

5. Per ASTM C702, which reduction method is NOT recommended for fine aggregate because it can introduce segregation errors?
✓ Miniature stockpile method

The miniature stockpile method is not recommended for fine aggregate because fine particles can segregate when formed into a small conical pile.

6. How should a field sample be reduced to testing size?
✓ Using a mechanical splitter or quartering method.

Mechanical splitting or quartering methods must be used to reduce the sample without bias.

🎯 Free ATT Practice Tests

📖 ATT Guides & Articles

Your ATT Study Path
1. Learn with Flashcards → 2. Drill Practice Tests → 3. Take the Full Exam Simulation

What Practice Test Geeks adds beyond an AI chat for ATT

An AI chatbot can quiz you, but it can't reproduce the exam conditions or keep your record. Here you get:

  • A timed, full-length ATT mock exam — 100 questions in 120 minutes with a 70% pass mark, modeled on the official exam's question count and time limit, followed by a score report broken down by exam domain.
  • A fixed ATT question bank: the same test every attempt, so your score is comparable from one try to the next instead of changing with every regenerated quiz.
  • Progress saved on your device: completed tests, scores and missed questions stay in My Progress, so you can retake only what you got wrong.
  • A printable ATT cheat sheet you can print or save as a PDF.
  • ATT flashcards built from the same question bank.
  • Free ATT practice tests with the correct answer shown after each question.
Start the Timed ATT Mock Exam →
Was this helpful?

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. concrete.org — Exam format, renewal, score validity, test delivery, eligibility, retake policy, score release, time limit, exam information · verified Nov 2026
ATT Study Guide 2026 — Exam Format, Topics & Practice Questions