ATC ATC Separation Standards 1

Question 1

What is the standard horizontal radar separation minimum between IFR aircraft in en route airspace?

Accepted Answer

5 nautical miles

Answer

The standard horizontal radar separation in en route airspace is 5 nautical miles, though this can be reduced to 3 nautical miles in certain terminal environments with appropriate authorization.

Question 2

What vertical separation standard applies between IFR aircraft at or below FL290 in domestic US airspace?

Accepted Answer

1,000 feet

Answer

The standard vertical separation at or below FL290 is 1,000 feet; above FL290, Reduced Vertical Separation Minima (RVSM) airspace allows 1,000 feet of separation up to FL410.

Question 3

What is RVSM and what vertical separation does it allow?

Accepted Answer

Reduced Vertical Separation Minima; 1,000 feet between FL290 and FL410

Answer

RVSM (Reduced Vertical Separation Minima) is the airspace between FL290 and FL410 where special equipment requirements allow vertical separation to be reduced from 2,000 feet to 1,000 feet, increasing airspace capacity.

Question 4

When does wake turbulence separation apply?

Accepted Answer

Whenever a lighter aircraft follows a heavier aircraft in the same airspace or on approach

Answer

Wake turbulence separation is required whenever a lighter aircraft follows a heavier aircraft, as the vortices generated by the leading aircraft's wings can pose a serious hazard to the following aircraft.

Question 5

What minimum wake turbulence separation is required for a small aircraft following a heavy aircraft on final approach?

Accepted Answer

5 nautical miles

Answer

A small aircraft following a heavy aircraft on final approach requires 5 nautical miles of separation to allow wake turbulence to dissipate before the lighter aircraft passes through the same area.

(ATC) Air Traffic Controller Practice Test

(ATC) Air Traffic Controller Practice Test

ATC ATC Separation Standards 1