ATA Bow Tech String & Cable Systems 2

Question 1

A bow technician notices one cam is rotating ahead of the other at full draw. What is the most likely cause?

Accepted Answer

Cam timing/synchronization issue caused by unequal cable or string length

Answer

Unequal cable or string lengths cause one cam to reach its peak position before the other, resulting in cam timing issues that affect accuracy and bow performance.

Question 2

What tool is essential for safely removing or pressing a compound bow's string and cables?

Accepted Answer

Bow press

Answer

A bow press safely compresses the limbs of a compound bow, relieving tension on the string and cables so they can be safely removed or replaced.

Question 3

What is a 'peep sight,' and where is it typically installed?

Accepted Answer

A small ring installed in the bow string that aligns with the front sight at full draw

Answer

A peep sight is a small aperture device threaded into the bow string strands that the archer looks through at full draw to align with the front sight, improving aiming accuracy.

Question 4

When installing a peep sight, the technician should ensure it:

Accepted Answer

Aligns perfectly with the archer's eye at full draw without rotation

Answer

A properly installed peep sight must align with the archer's dominant eye naturally at full draw with no rotation, ensuring a consistent aiming reference every shot.

Question 5

What is the purpose of a D-loop (string loop) on a compound bow string?

Accepted Answer

To provide a consistent, protected attachment point for a mechanical release aid

Answer

A D-loop ties around the nock point and provides a defined, rope-based connection point for mechanical releases, protecting the string from release jaw wear and ensuring consistent release attachment.

(ATA) Archery Trade Association Bow Technician Certification Practice Test

(ATA) Archery Trade Association Bow Technician Certification Practice Test

ATA Bow Tech String & Cable Systems 2