ASVAB Electronics Practice Test 1 2 Flashcards
6 cards from real ASVAB practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 ASVAB Electronics Practice Test 1 2 flashcards as text
A circuit has a resistance of 10 ohms and a current of 3 amperes flowing through it. What is the voltage across the resistor?
Answer: 30 volts
Ohm's Law states V = I × R. Substituting the given values: V = 3 A × 10 Ω = 30 volts. Ohm's Law is the most fundamental relationship in electronics, connecting voltage (V), current (I), and resistance (R).
What is the primary function of a capacitor in an electronic circuit?
Answer: To store electrical energy in an electric field and release it
A capacitor stores energy in the electric field between two conductive plates separated by an insulating material (dielectric). It can charge (store) and discharge (release) energy rapidly, making it useful for filtering, timing, and energy storage applications.
In a parallel circuit with three branches, if one branch is open (broken), what happens to the other two branches?
Answer: The remaining two branches continue to operate normally
In a parallel circuit, each branch has its own independent path back to the voltage source. If one branch opens (breaks), the other branches are unaffected — they still have complete paths and continue to operate at the same voltage. This is a key advantage of parallel wiring used in homes.
A transformer steps voltage up from 120V to 480V. If the primary coil has 200 turns, how many turns does the secondary coil have?
Answer: 800 turns
The transformer turns ratio formula is: V1/V2 = N1/N2. So N2 = N1 × (V2/V1) = 200 × (480/120) = 200 × 4 = 800 turns. Transformers work on electromagnetic induction and can only operate with AC because DC does not produce a changing magnetic field.
Which electronic component allows current to flow in only one direction?
Answer: Diode
A diode is a semiconductor device that acts like a one-way valve for electrical current — it conducts in the forward-biased direction and blocks current in the reverse-biased direction. Diodes are used in rectifiers to convert AC to DC, in signal detection, and in protection circuits.
What does an inductor do when the current through it suddenly increases?
Answer: It opposes the change in current by generating a back electromotive force (EMF)
An inductor opposes changes in current — this property is called inductance. When current increases, the magnetic field around the coil changes, inducing a back EMF (by Lenz's Law) that opposes the increase. This makes inductors useful in filtering AC ripple, smoothing power supplies, and blocking high-frequency signals.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- officialasvab.com — Exam format, score validity, score release, retake policy, passing score, test delivery, eligibility, exam information · verified Nov 2026