Practice Test GeeksASME - American Society of Mechanical Engineers Practice Test
← All ASME Flashcard Decks

ASME Cranes Hoists and Material Handling B30 Flashcards

7 cards from real ASME practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 ASME Cranes Hoists and Material Handling B30 flashcards as text

  1. According to ASME B30.9, what is the maximum allowable temperature for continuous use of wire rope slings with fiber cores?

    Answer: 300°F (149°C)

    ASME B30.9 limits fiber core wire rope slings to a maximum temperature of 300°F (149°C) because elevated temperatures degrade the fiber core and reduce the sling's rated capacity.

  2. Per ASME B30.2, how often must functional operational tests (frequent inspections) be conducted on overhead cranes in regular service?

    Answer: Before each shift or daily

    ASME B30.2 requires that frequent inspections of overhead cranes in regular service be performed at the start of each shift or daily to identify obvious defects before operation.

  3. According to ASME B30.5, which factor does NOT need to be considered when determining whether a lift is a 'critical lift'?

    Answer: The color of the rigging hardware being used

    The color of rigging hardware has no bearing on whether a lift qualifies as a critical lift; factors such as high percentage of rated capacity, multiple crane use, or personnel lifting define critical lifts.

  4. Per ASME B30.20, what is the minimum design factor required for mechanical below-the-hook lifting devices?

    Answer: 4:1

    ASME B30.20 requires a minimum design factor of 3:1 for mechanical below-the-hook lifting devices based on the ultimate load capacity relative to the rated load.

  5. According to ASME B30.2, at what sustained wind speed must outdoor overhead crane operations generally be suspended?

    Answer: The standard defers to the crane manufacturer's recommendation

    ASME B30.2 does not specify a fixed wind speed threshold but requires operators to follow the crane manufacturer's recommendations for maximum wind speed, which varies by crane type and configuration.

  6. Per ASME B30.9, what condition requires a wire rope sling to be immediately removed from service?

    Answer: Evidence of kinking, crushing, birdcaging, or core protrusion

    ASME B30.9 mandates removal from service when a wire rope sling shows evidence of kinking, crushing, birdcaging, or core protrusion because these defects severely compromise the sling's load-carrying ability.

  7. According to ASME B30.5, what is the primary purpose of outriggers on a mobile crane?

    Answer: To increase crane stability by widening the support base and reducing tipping risk

    Outriggers extend laterally from the crane's base to widen the support footprint, significantly improving stability against tipping when lifting heavy loads at large radii.