Plumbing, Electrical & HVAC Systems Flashcards
7 cards from real ASHI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Plumbing, Electrical & HVAC Systems flashcards as text
What is the minimum required slope for a horizontal drain pipe in a residential plumbing system?
Answer: 1/4 inch per foot
Horizontal drain pipes require a minimum slope of 1/4 inch per foot to ensure adequate flow and self-cleaning velocity.
During a home inspection, you observe a water heater flue pipe with a 1-inch clearance to combustibles. What is the correct action?
Answer: Report it as a safety hazard requiring correction
Single-wall flue pipes must maintain at least 6 inches of clearance from combustibles, making 1 inch a reportable fire hazard.
A 200-amp residential electrical service panel is inspected and found to have double-tapped breakers. Which statement is most accurate?
Answer: Some breakers are listed for double-tapping; the inspector should note it and defer to an electrician
Certain breakers (e.g., Square D QO series) are listed to accept two conductors, so an inspector should note the condition and recommend electrician evaluation.
What does a high-pitched squealing noise from an HVAC air handler most commonly indicate?
Answer: Failing blower motor bearings
A high-pitched squeal from an air handler typically signals worn or failing blower motor bearings requiring service.
Which pipe material is identified by its purple/lavender color and is commonly found in older mobile homes?
Answer: Polybutylene
Polybutylene pipe, often gray but sometimes marked with purple fittings, was widely used 1978–1995 and is known for premature failure.
An inspector finds a GFCI outlet in a bathroom that does not trip when tested. What should the inspector report?
Answer: The GFCI protection is non-functional and should be evaluated by an electrician
A GFCI that fails to trip when tested is not providing shock protection and must be reported as a safety deficiency.
What is the primary function of a pressure-balancing valve in a shower?
Answer: To prevent scalding when a toilet is flushed by maintaining temperature balance
A pressure-balancing valve maintains a set ratio of hot to cold water so a sudden pressure drop (e.g., toilet flush) does not cause scalding.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- test-takers.psiexams.com — Passing score, retake policy, score release, score validity · verified Nov 2026
- homeinspector.org — Eligibility, fees, renewal · verified Oct 2026
- nationalhomeinspectorexam.org — Test delivery, exam format, retake fee, test dates, time limit, exam information · verified Oct 2026