Quality Inspection Flashcards

During a pre-arrival gate inspection, which finding requires the gate to be cleared before the aircraft can enter?

Answer: A loose baggage tag lying near the stop line

Any foreign object debris in the aircraft movement area can be ingested by engines, so it must be removed before arrival.

What is the main purpose of a daily GSE pre-use inspection checklist?

Answer: To confirm the equipment is safe and serviceable before it approaches an aircraft

Pre-use checks catch defects like brake, hydraulic, or bumper damage before the equipment can harm an aircraft or person.

A belt loader fails its pre-use check because the rubber bumper pads are missing. What should the agent do?

Answer: Tag it out of service and report it to GSE maintenance

Defective GSE must be tagged unserviceable and removed from use until maintenance repairs it.

In a quality audit of bag loading, which observation is a nonconformance?

Answer: Bags loaded into a compartment different from the one on the load instruction report

Loading a compartment other than the one planned changes the aircraft's weight and balance and violates the load plan.

Why must a ramp agent report even minor aircraft damage like a small dent near a cargo door?

Answer: Even small damage can affect structural integrity or pressurization and must be checked by maintenance

Unreported damage can grow in flight, so all damage must be reported so maintenance can assess airworthiness.

What is the best way to verify that a cargo hold was properly secured before departure?

Answer: Visually check that nets, locks, and door are secured, then sign the loading document

A physical check followed by a signature creates accountability and confirms the hold is secured.

Which document is typically used to record ramp quality audit results?

Answer: Audit checklist or inspection form with findings and corrective actions

Audit forms record what was checked, what nonconformances were found, and what corrective actions were assigned.