ARS Fueling and Deicing Operations Flashcards

What fuel type is used in most commercial jet aircraft operating at US airports?

Answer: Jet-A

Jet-A is the standard commercial aviation turbine fuel used at US airports, with a flash point of approximately 100°F (38°C).

When conducting a fuel quality check before uplift, the ramp agent should check for which contamination?

Answer: Water and particulate matter

Fuel sumping checks for water and particulate contamination, both of which can cause engine flameout or fuel system blockages.

During overwing fueling of a small aircraft, which action is required after the fuel cap is removed?

Answer: Bond the nozzle to the aircraft before inserting

Bonding the nozzle to the aircraft before inserting it into the tank prevents static discharge that could ignite fuel vapors escaping from the open tank.

What does 'clean aircraft concept' mean in the context of winter deicing operations?

Answer: No frozen contaminants may adhere to critical aircraft surfaces at takeoff

The clean aircraft concept requires that no snow, ice, or frost be present on critical surfaces such as wings and control surfaces at the time of takeoff.

Which regulatory body sets standards for aircraft fueling operations at US airports?

Answer: FAA

The FAA establishes regulations and standards governing aircraft fueling operations, including fuel quality, safety procedures, and personnel certification.

After deicing is complete, the crew communicates a 'Deicing Complete' call which triggers what action?

Answer: The flight crew begins the contamination check and departure sequence

Upon receiving a 'Deicing Complete' communication, the flight crew initiates their contamination check procedure and begins the departure sequence within the holdover time.