Spine and Pelvis Procedures Flashcards
6 cards from real ARRT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Spine and Pelvis Procedures flashcards as text
A patient is positioned for an AP axial projection of the sacrum. Which of the following describes the correct central ray (CR) orientation and centering point?
Answer: 15 degrees cephalad, centered 2 inches superior to the pubic symphysis
For the AP axial projection of the sacrum, a 15-degree cephalic (upward) angle is required to project the pubic symphysis inferior to the sacrum, thus elongating the sacrum and opening the sacral foramina. The central ray should be directed to a point approximately 2 inches superior to the pubic symphysis.
A radiograph of a lateral lumbar spine shows that the L5-S1 intervertebral joint space is not open. The patient was positioned with the midcoronal plane parallel to the image receptor. Which of the following modifications is MOST appropriate for a coned-down 'spot' view?
Answer: Angle the CR 5-8 degrees caudad
When the L5-S1 joint space is not open on a true lateral lumbar spine image, it is often because the spine is not parallel to the image receptor due to the natural curve and pelvic tilt. A caudal (downward) angulation of 5-8 degrees (typically 5 for males, 8 for females) is necessary to align the central ray with the intervertebral joint space, effectively 'opening' it on the image.
To properly visualize the right sacroiliac (SI) joint with minimal superimposition, which of the following positions should be performed?
Answer: AP projection, left posterior oblique (LPO)
For AP oblique projections of the SI joints, the joint of interest is the one that is elevated, or farthest from the image receptor. Therefore, to visualize the right SI joint, the patient should be placed in a left posterior oblique (LPO) position with a body rotation of approximately 25-30 degrees.
A trauma patient requires an evaluation for a suspected pelvic ring fracture. The physician orders an AP axial 'outlet' projection (Taylor method). How should the technologist direct the central ray for a male patient?
Answer: 20-35 degrees cephalad, centered 2 inches distal to the superior border of the pubic symphysis
The AP axial 'outlet' projection, or Taylor method, is designed to demonstrate the pubic and ischial rami without foreshortening. This is achieved by directing the central ray with a cephalic (upward) angle. For male patients, the angle is typically 20-35 degrees cephalad, centered to a point 2 inches distal to the superior border of the pubic symphysis.
A scoliosis series including AP right and left bending projections (Ferguson method) is ordered. What is the primary purpose of performing these bending views?
Answer: To differentiate between structural and functional scoliosis
The Ferguson method, which involves AP projections with lateral bending, is specifically used to distinguish between structural and functional scoliosis. A structural curve is fixed and will show minimal correction on the bending films. A functional curve is compensatory and will straighten or reduce significantly when the patient bends toward the convex side of the curve.
A radiograph of an AP pelvis is obtained on a patient who was positioned supine on the table with their legs extended. The image demonstrates significant foreshortening of the femoral necks. Which of the following positioning corrections is required for a repeat exposure?
Answer: Separate the heels and internally rotate the feet and lower limbs 15-20 degrees
To place the femoral necks parallel to the image receptor and demonstrate them in their true anatomical profile, the lower limbs must be medially (internally) rotated 15-20 degrees. This maneuver overcomes the natural anteversion of the femoral necks. This is typically achieved by having the patient touch their big toes together or ensuring the heels are about 8-10 inches apart and the feet are rotated inward.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- arrt.org — Registration deadline, test dates, score release, retake policy, passing score, eligibility, fees, renewal, retake fee, exam information · verified Nov 2026
- pearsonvue.com — Test delivery · verified Nov 2026
- assets-us-01.kc-usercontent.com — Exam format, time limit · verified Nov 2026