ARDMS SPI - ARDMS Sonography Principles and Instrumentation Ultrasound Bioeffects and Safety Questions and Answers

Question 1

A sonographer is performing an obstetric ultrasound on a patient in her second trimester. The on-screen display shows a Thermal Index for Bone (TIB) of 1.2. According to the ALARA principle, which of the following actions is most appropriate?

Accepted Answer

Decrease the acoustic output power and minimize the dwell time over any single area.

Answer

The ALARA (As Low As Reasonably Achievable) principle dictates that sonographers should use the lowest possible ultrasound exposure to obtain diagnostic images. A TIB of 1.2 indicates a potential for temperature increase in fetal bone. While not an absolute contraindication, the most appropriate action is to take steps to reduce the exposure. Decreasing the output power and minimizing the time the beam is focused on one spot (dwell time) are key strategies to lower the thermal exposure and adhere to the ALARA principle.

Question 2

The Mechanical Index (MI) is an on-screen indicator of the potential for which ultrasound bioeffect?

Accepted Answer

Cavitation

Answer

The Mechanical Index (MI) is a value calculated to estimate the likelihood of non-thermal bioeffects, with the most significant being cavitation. Cavitation is the formation, growth, and collapse of gas bubbles in response to the pressure fluctuations of the ultrasound wave. The MI is directly related to the peak negative pressure and inversely related to the square root of the frequency.

Question 3

Which of the following would be MOST likely to increase the Thermal Index (TI) during a diagnostic ultrasound examination?

Accepted Answer

Switching from B-mode to Color Doppler

Answer

Switching to modes like Color Doppler or Pulsed-Wave Doppler generally increases the acoustic output and energy deposited in the tissue, leading to a higher Thermal Index (TI). Receiver gain only amplifies the returning echoes and does not change the transmitted power. Decreasing imaging depth or using a lower frequency transducer does not inherently increase the TI as significantly as changing to a higher-energy mode like Doppler.

Question 4

A sonographer is scanning a patient with a known lung consolidation. They should be particularly mindful of the Mechanical Index (MI) because:

Accepted Answer

Gas bubbles present in the lung are nuclei for cavitation.

Answer

The Mechanical Index (MI) indicates the risk of cavitation, which is the interaction of sound waves with gas bubbles. Tissues that contain gas, such as the lungs and intestines, are more susceptible to cavitation bioeffects because the pre-existing gas bubbles can act as nuclei for this phenomenon. Therefore, sonographers should be extra cautious and monitor the MI when imaging near or within such structures.

Question 5

According to the U.S. Food and Drug Administration (FDA) guidelines, which principle should sonographers always follow to minimize patient exposure to ultrasound energy?

Accepted Answer

The As Low As Reasonably Achievable (ALARA) Principle

Answer

The FDA, along with other regulatory and professional bodies like the AIUM, advocates for the prudent use of diagnostic ultrasound by following the As Low As Reasonably Achievable (ALARA) principle. This means using the lowest output power and shortest scan time that will yield diagnostic-quality images, thereby minimizing the patient's exposure to potential bioeffects.

ARDMS SPI - ARDMS Sonography Principles and Instrumentation Practice Test

ARDMS SPI - ARDMS Sonography Principles and Instrumentation Practice Test

ARDMS SPI - ARDMS Sonography Principles and Instrumentation Ultrasound Bioeffects and Safety Questions and Answers