Tools & Equipment Operation Flashcards
7 cards from real AIC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Tools & Equipment Operation flashcards as text
Under OSHA 1926.302(e), who may operate a powder-actuated fastening tool?
Answer: Only employees trained in its operation
OSHA allows only trained employees to operate powder-actuated tools.
OSHA requires GFCI protection for which temporary construction receptacles that are not part of permanent wiring?
Answer: All 120-volt, single-phase 15-, 20-, and 30-amp receptacles
OSHA 1926.404(b)(1) requires GFCIs on all 120-V, single-phase 15-, 20-, and 30-A temporary receptacles.
On a bench grinder, what is the maximum allowable gap between the work rest and the abrasive wheel?
Answer: 1/8 inch
The work rest must be kept within 1/8 inch of the wheel so the workpiece cannot jam between them.
Under OSHA 1926.453, what fall protection is required for workers in a boom-supported aerial lift?
Answer: A body belt or harness with lanyard attached to the boom or basket
Workers in boom lifts must wear fall protection with the lanyard attached to the boom or basket, never to a nearby structure.
Under OSHA 1910.178, how often must each powered industrial truck (forklift) operator's performance be evaluated, at minimum?
Answer: Every 3 years
Forklift operators must be evaluated at least once every three years.
OSHA requires a safety device at the air source or branch line to reduce pressure if a hose fails. Above what hose inside diameter does this apply?
Answer: 1/2 inch
OSHA 1926.302(b)(7) requires this device on all hoses larger than 1/2 inch inside diameter.
When is renting a piece of construction equipment usually more economical than buying it?
Answer: When usage is low or intermittent and utilization would be poor
Renting avoids ownership costs on equipment that would otherwise sit idle much of the time.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- aic-builds.org — Test delivery, late registration, test dates, renewal, eligibility, fees, exam format, time limit, exam information · verified Oct 2026