ADI Vehicle Loading 2

Question 1

A load is protruding from the rear of a vehicle by more than 1 metre. What must the driver ensure?

Accepted Answer

The overhanging load must be made clearly visible, and if it extends more than 2 metres, it must be marked with a red flag or other prescribed marker and may require notification to the police

Answer

Loads projecting more than 1 metre to the rear must be made clearly visible. If the projection exceeds 2 metres, the end must be marked with a red and white striped marker board or red flag. Projections over 3.05 metres require police notification, and over 3.66 metres require an attendant.

Question 2

When loading a vehicle, how should the weight be distributed?

Accepted Answer

Heavy items should be placed low and as close to the centre of the vehicle as possible, with the load distributed evenly side to side

Answer

For optimal vehicle stability, heavy items should be placed low in the load space (lowering the centre of gravity), centred between the axles, and distributed evenly from side to side. Uneven loading can cause the vehicle to pull to one side, and top-heavy loading increases rollover risk.

Question 3

What is the driver's legal responsibility if an insecure load falls from their vehicle and causes an accident?

Accepted Answer

The driver can be prosecuted for using a vehicle with an insecure load, face dangerous driving charges if injury results, and may be liable for damages in a civil claim

Answer

The driver is legally responsible for ensuring their load is secure. If an insecure load causes an accident, the driver may face prosecution under the Construction and Use Regulations, charges of driving without due care or dangerous driving, and civil liability for any injuries or damage caused.

Question 4

What effect does carrying passengers have on the way a vehicle handles compared to driving alone?

Accepted Answer

Additional passengers increase the vehicle's weight, which increases braking distances, affects acceleration, changes the suspension behaviour, and may require tyre pressure adjustments

Answer

Passengers add weight that affects the vehicle's performance: braking distances increase, acceleration is reduced, the suspension compresses more (affecting ground clearance and headlight alignment), and tyre pressures may need adjusting. A full vehicle handles noticeably differently from an empty one.

Question 5

An ADI is teaching a learner about checking their vehicle before a journey with a loaded roof rack. What should be checked?

Accepted Answer

That the roof rack is properly fitted, all fastenings are tight, the load does not exceed the roof rack's or vehicle's weight limit, items are individually secured, and nothing can come loose in the wind

Answer

Before driving with a roof load, check: the rack is securely fitted to the vehicle's mounting points, all items are individually tied or strapped down, the combined weight does not exceed the rack's or vehicle's roof load limit, items are aerodynamically arranged, and nothing protrudes dangerously.

DVSA UK Driving Theory Practice Test

DVSA UK Driving Theory Practice Test

ADI Vehicle Loading 2