ABO NOCE Basic Opticianry Bifocal and Trifocal Lens Design

Question 1

What is 'image jump' in a bifocal lens?

Accepted Answer

The prismatic displacement of an image that occurs as the line of sight crosses the top edge of the bifocal segment

Answer

Image jump is the sudden prismatic displacement of an object seen the instant the line of sight crosses the top of the bifocal segment. Its magnitude equals the add power multiplied by the distance (in cm) from the segment top to the segment's optical center, per Prentice's Rule.

Question 2

Which bifocal style produces zero image jump?

Accepted Answer

Executive (Franklin split) bifocal

Answer

In an executive (E-style or Franklin split) bifocal, the segment's optical center is located precisely at the dividing line — the top of the segment. Because the distance from the segment top to its OC is zero, Prentice's Rule yields zero prism at the boundary, eliminating image jump entirely.

Question 3

A flat-top 28 bifocal has an add power of +2.50 D. The segment OC is 5 mm below the segment top. What is the amount of image jump?

Accepted Answer

1.25 prism diopters

Answer

Using Prentice's Rule: P = F × d = 2.50 × 0.5 cm = 1.25 prism diopters. The distance d is 5 mm (0.5 cm) from the segment top to the segment OC, and F is the add power. This base-down prism causes the image to jump upward as gaze enters the segment.

Question 4

The intermediate segment of a trifocal lens is typically prescribed at what power relative to the full near add?

Accepted Answer

One-half of the full add

Answer

The intermediate addition in a trifocal is half the full near add power. For example, a +2.50 near add produces a +1.25 intermediate add, providing clear focus at arm's length (approximately 60–80 cm). This half-add convention is industry standard for trifocal designs.

Question 5

Seg height for a bifocal is typically measured from which reference point?

Accepted Answer

From the lowest point of the lens (frame bottom) to the top of the segment dividing line

Answer

Bifocal segment height (seg height) is measured from the lowest edge of the lens or frame opening to the top of the segment dividing line. This measurement tells the lab exactly where to place the segment boundary within the lens blank, ensuring the reading zone is at the correct position for the patient.

ABO NOCE Basic Opticianry Practice Test

ABO NOCE Basic Opticianry Practice Test

ABO NOCE Basic Opticianry Bifocal and Trifocal Lens Design