A2 CofC - Drone Certificate of Competency Pre-Flight Planning and Checks Questions and Answers

Question 1

A remote pilot is planning a flight for a weekend event near a coastal town. What is the most appropriate official source to check for temporary airspace restrictions, such as an airshow or maritime event, that might affect the operation?

Accepted Answer

The CAA's NOTAM (Notice to Airmen) database or a service that provides this data.

Answer

NOTAMs (Notices to Airmen) are the official system used by aviation authorities, including the UK's Civil Aviation Authority (CAA), to disseminate timely information about temporary hazards and restrictions to all airspace users. While some apps display this data, the NOTAM database is the primary official source.

Question 2

During a pre-flight inspection of a multirotor UAS, which of the following checks is most critical for ensuring correct and stable flight control immediately upon take-off?

Accepted Answer

Checking for correct propeller installation (e.g., clockwise/counter-clockwise) and security.

Answer

Incorrectly installing propellers, for example by swapping a clockwise and a counter-clockwise prop on adjacent motors, will prevent the UAS from generating balanced thrust. This will make it impossible to take off or will cause it to flip over immediately upon applying power, resulting in a total loss of control.

Question 3

Before installing a LiPo battery for a flight, a remote pilot observes that the battery casing feels slightly soft and has a noticeable bulge or 'puffiness'. What is the correct course of action according to safety best practices?

Accepted Answer

Immediately remove the battery from service, isolate it in a fire-safe location, and arrange for its safe disposal.

Answer

Swelling or 'puffing' in a LiPo battery is a clear sign of internal damage and gas build-up, which creates a significant fire risk. The battery is compromised and must be safely decommissioned immediately. Attempting to charge, use, or puncture it is extremely dangerous.

Question 4

A remote pilot is conducting a site survey for an A2 operation in a public park. They identify a children's playground, a designated dog-walking path, and a main road bordering the park. In their pre-flight risk assessment, how should these features primarily be categorised?

Accepted Answer

As areas of high concentration of uninvolved people and potential hazards.

Answer

The purpose of a site survey is to identify potential risks. Areas where uninvolved people are known to congregate (playground, path) or dynamic hazards (road) are key elements to identify. This allows the pilot to plan flight paths, establish buffers, and create contingency plans to ensure required separation distances are maintained throughout the operation.

Question 5

Which of the following is a crucial component of a remote pilot's contingency plan for a sudden loss of the control link to their UAS during an A2 operation?

Accepted Answer

Knowing the pre-set behaviour of the UAS's failsafe system, such as its Return to Home (RTH) altitude and landing procedure.

Answer

The failsafe system determines what the UAS will do automatically if the control link is lost. The pilot must know what this behaviour is (e.g., will it return to home at a specific altitude, land on the spot, or hover?) to anticipate its flight path and ensure the automated action does not create a new hazard, such as colliding with an obstacle on its way home.

A2 CofC Drone Practice Test

A2 CofC Drone Practice Test

A2 CofC - Drone Certificate of Competency Pre-Flight Planning and Checks Questions and Answers