← All 456A Flashcard Decks

Oxyfuel Welding & Cutting Flashcards

7 cards from real 456A practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Oxyfuel Welding & Cutting flashcards as text
  1. What type of flame is produced when oxygen and acetylene are mixed in equal proportions?

    Answer: Neutral flame

    A neutral flame results from an equal mixture of oxygen and acetylene, producing a well-defined inner cone with no acetylene feather, making it ideal for welding most steels.

  2. What is the maximum allowable working pressure for acetylene in Canada?

    Answer: 103 kPa (15 psi)

    Acetylene becomes chemically unstable and risk of explosive decomposition above 103 kPa (15 psi), making this the absolute maximum safe working pressure.

  3. In Canada, what color is the oxygen hose used in oxyfuel equipment?

    Answer: Green

    In Canada, the oxygen hose is green with right-hand threaded fittings to clearly distinguish it from the red fuel gas hose and prevent dangerous cross-connection.

  4. What is the primary purpose of a flashback arrestor in an oxyfuel system?

    Answer: To prevent flame from traveling back into the hoses and cylinders

    Flashback arrestors contain a flame barrier and check valve that stop a backfiring flame from propagating back through the hoses toward the cylinders, preventing a catastrophic explosion.

  5. Which type of oxyfuel flame is characterized by an acetylene feather between the inner cone and outer envelope, and is used for welding high-carbon steel?

    Answer: Carburizing (reducing) flame

    A carburizing flame has excess acetylene, producing a luminous feather that adds carbon to the weld pool — useful for hard-facing and high-carbon steel applications.

  6. When lighting an oxyfuel torch, which gas valve should be opened and ignited first?

    Answer: Acetylene (fuel gas)

    Fuel gas (acetylene) is always opened and lit first to establish a flame before oxygen is added, preventing the risk of creating an explosive pre-mixed atmosphere in the air.

  7. What distinguishes an oxyfuel cutting tip from a standard welding tip?

    Answer: Cutting tips have a central cutting oxygen orifice surrounded by preheat holes

    A cutting tip has a central high-pressure oxygen jet orifice for the cutting stream, surrounded by smaller preheat flame holes that raise the metal to its ignition temperature before cutting begins.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. red-seal.ca — Exam format, exam information · verified Nov 2026
  2. skilledtradesontario.ca — Passing score, score release, time limit, renewal, score validity, eligibility, retake fee, test delivery, fees, retake policy · verified Nov 2026