WTO - Water Treatment Operator Water Quality Monitoring Questions and Answers 1

Question 1

An operator observes a sudden, significant increase in turbidity in the raw water entering the treatment plant following a heavy rainfall. Which of the following is the most critical immediate action?

Accepted Answer

Increase the coagulant dosage and adjust pH.

Answer

Increased turbidity, especially after a storm, indicates a higher load of suspended particles. This requires an immediate adjustment of the coagulation process to effectively remove the particles. Increasing the coagulant dosage helps to destabilize the increased number of particles, allowing them to flocculate and be removed by sedimentation and filtration. Shutting down the plant is an extreme measure and usually not the first step. Waiting is not proactive and could lead to treatment process failure. While bacteriological sampling is important, process control adjustment is the most critical immediate action.

Question 2

What is the primary reason for monitoring chlorine residual at various points in the distribution system?

Accepted Answer

To verify that an adequate disinfectant concentration is maintained to prevent recontamination.

Answer

Maintaining a chlorine residual throughout the distribution system is crucial to protect public health. It serves as an indicator that the water is protected from microbial contamination as it travels from the treatment plant to the consumer's tap. If a residual is present, it can help inactivate low levels of contaminants that might enter the system.

Question 3

A water sample is collected for a coliform test. To ensure the sample's integrity and obtain accurate results, which substance must be present in the sample bottle before collection?

Accepted Answer

Sodium thiosulfate to neutralize any chlorine residual.

Answer

When collecting water samples for bacteriological testing (like for coliforms), it is essential to neutralize any disinfectant residual (such as chlorine) at the time of collection. If not neutralized, the disinfectant would continue to kill bacteria in the sample, leading to a false negative result. Sodium thiosulfate is the standard agent used for this purpose.

Question 4

Which of the following water quality parameters is a measure of the water's ability to neutralize acids and acts as a buffer against pH changes?

Accepted Answer

Alkalinity

Answer

Alkalinity is a measure of the water's capacity to neutralize acids. It is primarily caused by the presence of carbonate, bicarbonate, and hydroxide ions. This buffering capacity is important in water treatment as it affects pH stability, which in turn influences coagulation, disinfection, and corrosion control.

Question 5

An operator is conducting routine monitoring and finds that the pH of the finished water has dropped to 6.2. This could be a concern primarily because:

Accepted Answer

It can increase the potential for corrosion of pipes in the distribution system.

Answer

A low pH indicates that the water is acidic. Acidic water is aggressive and can corrode metal pipes and plumbing fixtures, potentially leaching metals like lead and copper into the drinking water. While pH affects other treatment processes, its direct impact on the distribution system's infrastructure and the potential for metal contamination is a major concern.

(WTO) Water Treatment Operator Certification Practice Test

(WTO) Water Treatment Operator Certification Practice Test

WTO - Water Treatment Operator Water Quality Monitoring Questions and Answers 1