WTMA - Wiesen Test of Mechanical Aptitude Springs and Elasticity Questions and Answers

Question 1

A spring has a 10 lb weight attached to it, causing it to stretch 2 inches from its natural position. If the 10 lb weight is replaced with a 20 lb weight, how much will the spring stretch from its original, unstretched position, assuming it remains within its elastic limit?

Accepted Answer

4 inches

Answer

According to Hooke's Law, the force (F) required to stretch or compress a spring by some distance (x) is directly proportional to that distance (F = kx). By doubling the force (from 10 lbs to 20 lbs), the displacement (stretch) will also double, from 2 inches to 4 inches.

Question 2

Which of the following statements best describes a spring with a high spring constant (k)?

Accepted Answer

It requires a large force to produce a small amount of stretch or compression.

Answer

The spring constant, 'k', is a measure of the stiffness of a spring. A high 'k' value indicates a very stiff spring, which means a large amount of force is needed to deform it (stretch or compress) by even a small distance.

Question 3

A heavy block is placed on a single compression spring, causing it to compress by 4 cm. If an identical second spring is placed next to the first (in parallel), and the same block is placed on top of both springs, what will be the new compression distance?

Accepted Answer

2 cm

Answer

When two identical springs are placed in parallel, they share the load. This doubles the effective spring constant of the system, making it twice as stiff. Since the force (the block's weight) remains the same but the stiffness is doubled, the compression distance will be halved. The new compression will be 4 cm / 2 = 2 cm.

Question 4

What is the term for the point beyond which a spring or other elastic material, when stretched, will not return to its original shape after the deforming force is removed?

Accepted Answer

Elastic Limit

Answer

The elastic limit is the maximum stress a material can withstand without undergoing permanent (plastic) deformation. If a spring is stretched beyond this point, it enters the plastic deformation region and will be permanently deformed.

Question 5

Two identical springs are connected end-to-end (in series). A 5 kg mass hung from a single one of these springs causes it to stretch by 10 cm. What will be the TOTAL stretch when the same 5 kg mass is hung from the two-spring series combination?

Accepted Answer

20 cm

Answer

In a series combination, the force (the 5 kg weight) is transmitted through each spring. Since both springs are identical, each will feel the full force and stretch by its characteristic amount, which is 10 cm. The total stretch is the sum of the individual stretches: 10 cm + 10 cm = 20 cm.

WTMA - Wiesen Test of Mechanical Aptitude Practice Test

WTMA - Wiesen Test of Mechanical Aptitude Practice Test

WTMA - Wiesen Test of Mechanical Aptitude Springs and Elasticity Questions and Answers