WPR Work Permit Types & Scope 2

Question 1

A work-at-height permit is typically required for elevated work above:

Accepted Answer

4 feet in general industry or 6 feet in construction, per OSHA standards

Answer

OSHA height thresholds that trigger fall protection requirements also generally trigger work-at-height permits: 4 feet (general industry) and 6 feet (construction).

Question 2

What defines the 'scope' section of a work permit?

Accepted Answer

The specific task to be performed, the equipment involved, the work location, and any limitations on the work

Answer

Scope defines exactly what is authorized—work outside the stated scope is not covered by the permit and requires a new or amended authorization.

Question 3

A process safety management (PSM) covered facility requires which additional type of permit for modifications to covered processes?

Accepted Answer

Management of Change (MOC) authorization, in addition to standard work permits

Answer

OSHA's PSM standard (29 CFR 1910.119) requires MOC review and authorization before any change to process technology, equipment, or procedures at covered facilities.

Question 4

If a work permit specifies that only two workers may be inside a confined space at one time, a WPR may not:

Accepted Answer

Allow a third worker to enter even if the supervisor requests it

Answer

Permit conditions like occupancy limits are hazard-based controls; exceeding them violates the permit and creates uncontrolled risk regardless of supervisor requests.

Question 5

The scope of a hot work permit explicitly states 'grinding only.' During the job, the crew decides to also weld. What must happen?

Accepted Answer

Work must stop and a new or amended permit must be obtained that specifically authorizes welding

Answer

Welding is a different task with different hazards than grinding; the original permit's scope does not cover it and a new authorization is required.

WPR - Work Permit Receiver Practice Test

WPR - Work Permit Receiver Practice Test

WPR Work Permit Types & Scope 2