WPR Personal Protective Equipment (PPE) 2

Question 1

Fit testing for tight-fitting respirators is required by OSHA:

Accepted Answer

Initially before first use and annually thereafter, or when physical changes may affect fit

Answer

OSHA 29 CFR 1910.134 requires initial and annual fit testing for all tight-fitting respirators to ensure an adequate seal.

Question 2

What is the hierarchy of controls, and where does PPE fall within it?

Accepted Answer

PPE is the last resort at the bottom of the hierarchy, after elimination, substitution, engineering controls, and administrative controls

Answer

NIOSH's hierarchy places PPE last because it does not eliminate hazards but merely reduces worker exposure—higher controls are always preferred.

Question 3

Chemical-resistant gloves used during a permitted chemical handling task should be selected based on:

Accepted Answer

Compatibility with the specific chemical(s) being handled as verified by the glove manufacturer's chemical resistance chart

Answer

Not all glove materials resist all chemicals; manufacturer compatibility charts must be consulted to select a glove that resists the specific chemical in use.

Question 4

Fall protection PPE is required by OSHA when working at heights of:

Accepted Answer

4 feet in general industry or 6 feet in construction

Answer

OSHA's general industry standard requires fall protection at 4 feet, while the construction standard triggers at 6 feet.

Question 5

What does the term 'PPE program' encompass in a permit-to-work environment?

Accepted Answer

A written program covering hazard assessment, PPE selection, training, maintenance, and enforcement

Answer

A complete PPE program includes all elements from hazard evaluation through worker training and equipment maintenance, not just equipment procurement.

WPR - Work Permit Receiver Practice Test

WPR - Work Permit Receiver Practice Test

WPR Personal Protective Equipment (PPE) 2