Working at Heights - RIIWHS204E Cheat Sheet 2026

The 30 highest-yield Working at Heights - RIIWHS204E facts, distilled from real exam questions. Print it, save it as a PDF, or study it here — free, no sign-up.

1. What must be done when Fall Prevention Systems legislation changes? → Update procedures, risk assessments, and training to comply with the new requirements
2. What supervisory requirements exist for Rescue Planning activities? → Adequate supervision by competent persons, proportionate to the level of risk
3. What record retention period applies to Rescue Planning documents under WHS Regulations? → Typically 5 years, or 30 years for health monitoring and asbestos records
4. What is the importance of near-miss reporting for Scaffolding Safety? → Near misses reveal existing hazards and allow preventive action before injuries occur
5. What is the first step in a Ladder Safety risk assessment? → Identify all hazards associated with ${subjectName}
6. What training is required before workers perform Harness Inspection and Use activities? → Appropriate training covering hazards, procedures, equipment use, and emergency response
7. What is the first step in a Harness Inspection and Use risk assessment? → Identify all hazards associated with ${subjectName}
8. What training is required before workers perform Ladder Safety activities? → Appropriate training covering hazards, procedures, equipment use, and emergency response
9. What must be done when Ladder Safety legislation changes? → Update procedures, risk assessments, and training to comply with the new requirements
10. What record retention period applies to Fall Prevention Systems documents under WHS Regulations? → Typically 5 years, or 30 years for health monitoring and asbestos records
11. What must be done when Edge Protection legislation changes? → Update procedures, risk assessments, and training to comply with the new requirements
12. What must be done when WHS Legislation for Heights legislation changes? → Update procedures, risk assessments, and training to comply with the new requirements
13. How often should Anchorage Point Selection procedures be reviewed? → Regularly, after incidents, when conditions change, or when new information emerges
14. Under Australian regulations, who bears primary responsibility for Risk Assessment for Heights compliance? → The PCBU (Person Conducting a Business or Undertaking)
15. How does a travel restraint system fundamentally differ from a fall arrest system? → Travel restraint prevents reaching the fall zone; fall arrest stops a fall in progress
16. What is the first step in a Roofwork Safety risk assessment? → Identify all hazards associated with ${subjectName}
17. How should Roofwork Safety incidents be reported in an Australian workplace? → Report immediately to the supervisor, with notifiable incidents reported to the regulator
18. What is the importance of near-miss reporting for EWP Safety Basics? → Near misses reveal existing hazards and allow preventive action before injuries occur
19. How often should Roofwork Safety procedures be reviewed? → Regularly, after incidents, when conditions change, or when new information emerges
20. What must be done when Harness Inspection and Use legislation changes? → Update procedures, risk assessments, and training to comply with the new requirements
21. How often should Risk Assessment for Heights procedures be reviewed? → Regularly, after incidents, when conditions change, or when new information emerges
22. What training is required before workers perform Scaffolding Safety activities? → Appropriate training covering hazards, procedures, equipment use, and emergency response
23. What supervisory requirements exist for Roofwork Safety activities? → Adequate supervision by competent persons, proportionate to the level of risk
24. What is the importance of near-miss reporting for Harness Inspection and Use? → Near misses reveal existing hazards and allow preventive action before injuries occur
25. Under Australian regulations, who bears primary responsibility for Emergency Procedures at Height compliance? → The PCBU (Person Conducting a Business or Undertaking)
26. How often should Ladder Safety procedures be reviewed? → Regularly, after incidents, when conditions change, or when new information emerges
27. What record retention period applies to Roofwork Safety documents under WHS Regulations? → Typically 5 years, or 30 years for health monitoring and asbestos records
28. What supervisory requirements exist for WHS Legislation for Heights activities? → Adequate supervision by competent persons, proportionate to the level of risk
29. What must be done when Roofwork Safety legislation changes? → Update procedures, risk assessments, and training to comply with the new requirements
30. How should Risk Assessment for Heights incidents be reported in an Australian workplace? → Report immediately to the supervisor, with notifiable incidents reported to the regulator