Woodworking Tools And Equipment 2 — Questions and Answers
Question 1: Which hand tool is best suited for cutting a board across the grain?
- Crosscut saw (Correct answer)
- Rip saw
- Coping saw
- Hacksaw
Correct answer: Crosscut saw
A crosscut saw has teeth angled and beveled to sever wood fibers across the grain cleanly.
Question 2: What is the purpose of a marking gauge in woodworking?
- To scribe a line parallel to an edge (Correct answer)
- To measure board thickness
- To drill pilot holes
- To smooth end grain
Correct answer: To scribe a line parallel to an edge
A marking gauge scribes a line a set distance from and parallel to a reference edge.
Question 3: Which chisel type is designed for chopping deep mortises?
- Mortise chisel (Correct answer)
- Paring chisel
- Skew chisel
- Butt chisel
Correct answer: Mortise chisel
A mortise chisel has a thick, sturdy blade to withstand mallet blows when chopping mortises.
Question 4: What does a jointer plane primarily do?
- Flatten and straighten long edges (Correct answer)
- Cut decorative profiles
- Bore holes
- Shape curves
Correct answer: Flatten and straighten long edges
A jointer plane's long sole flattens and trues long edges for tight glue joints.
Question 5: Which tool measures whether a surface is perfectly level?
- Spirit level (Correct answer)
- Combination square
- Calipers
- Marking knife
Correct answer: Spirit level
A spirit level uses a bubble in liquid to show when a surface is level or plumb.
Question 6: What is a brad-point bit best used for?
- Clean, accurately located holes in wood (Correct answer)
- Cutting metal
- Driving screws
- Sanding contours
Correct answer: Clean, accurately located holes in wood
A brad-point bit has a center spur that prevents wandering for precise hole placement in wood.
Question 7: Which clamp is best for applying broad, even pressure across a wide panel glue-up?
- Pipe or bar clamp (Correct answer)
- Spring clamp
- C-clamp
- Hand screw
Correct answer: Pipe or bar clamp
Pipe and bar clamps span wide panels and distribute even pressure during glue-ups.
Woodworking Tools And Equipment 2
Which hand tool is best suited for cutting a board across the grain?