Woodworking Best Practices In Woodworking 4

Question 1

Which joint is generally considered the strongest for joining two boards at a right angle in casework?

Accepted Answer

Mortise and tenon

Answer

The mortise-and-tenon provides a large long-grain glue surface and mechanical interlock, making it very strong.

Question 2

What is the best practice for clamping a glue-up?

Accepted Answer

Apply even pressure and check for squeeze-out along the seam

Answer

Even, moderate pressure with visible squeeze-out indicates good contact without starving the joint.

Question 3

Why should screws into hardwood be preceded by a pilot hole?

Accepted Answer

To prevent splitting the wood

Answer

A pilot hole relieves stress in dense hardwood so the screw does not wedge the fibers apart and split them.

Question 4

When finishing a project, why is it best to test a stain or finish on a scrap of the same wood first?

Accepted Answer

Wood species and grain absorb finish differently, affecting color

Answer

Testing on matching scrap shows the true color and absorption before committing to the finished piece.

Question 5

What is the recommended way to store finishing rags soaked in oil-based products?

Accepted Answer

Spread flat to dry or submerge in water in a sealed metal container

Answer

Oil-soaked rags can spontaneously combust when bunched, so they must be dried flat or kept in water in a metal can.

Woodworking Practice Test