WALMART MAINTENANCE Carpentry and Structural Repairs 3

Question 1

What is the correct sequence for applying joint compound when finishing a drywall seam in a Walmart retail area?

Accepted Answer

Tape coat → finish coat → topping coat

Answer

Topping coat → tape coat → finish coat

Answer

Finish coat → tape coat → sanding only

Answer

Tape coat → topping coat → sanding without additional coats

Question 2

Which sandpaper grit is most appropriate for the final sanding of joint compound before painting drywall in a commercial facility?

Accepted Answer

120-grit

Answer

60-grit

Answer

100-grit

Answer

220-grit

Question 3

When repairing an exterior door threshold at a Walmart store, which material is preferred for its durability and resistance to heavy foot traffic?

Accepted Answer

Aluminum or steel

Answer

Pine wood

Answer

PVC composite

Answer

Rubber only

Question 4

A maintenance technician is installing baseboard trim in a Walmart break room where two walls meet at a 90-degree corner. What angle should each miter cut be to form a proper inside corner?

Accepted Answer

45 degrees on each piece

Answer

30 degrees on each piece

Answer

22.5 degrees on each piece

Answer

60 degrees on each piece

Question 5

What is the primary reason Walmart maintenance technicians should use construction adhesive IN ADDITION to fasteners when installing wall paneling?

Accepted Answer

To provide additional bond strength and prevent panel warping or buckling

Answer

To reduce the number of fasteners needed for code compliance

Answer

To create a waterproof barrier behind the panel

Answer

To fill gaps between the panel and the wall framing

Question 6

When a Walmart maintenance technician needs to cut an opening in existing drywall for a new electrical box, which tool provides the most precise and controlled cut?

Accepted Answer

Rotary cut-out tool (RotoZip)

Answer

Reciprocating saw

Answer

Oscillating multi-tool

Answer

Utility knife only

Question 7

Which fastener should a Walmart maintenance technician use when attaching a heavy equipment bracket directly to a concrete block (CMU) wall?

Accepted Answer

Wedge anchor bolt

Answer

Standard wood screw with a plastic anchor

Answer

Toggle bolt

Answer

Finish nail