Vehicle Checks and Daily Inspection Flashcards
6 cards from real PCV practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Vehicle Checks and Daily Inspection flashcards as text
When carrying out a brake check before driving, at what speed should a 'brake snatch' test typically be conducted?
Answer: 10 mph
A basic brake effectiveness check is typically done at about 10 mph in a safe area.
What is the purpose of checking the vehicle's body and underframe during a pre-drive inspection?
Answer: To identify structural damage, corrosion, or loose fittings that could affect safety
Body and underframe checks identify structural problems such as cracks, serious corrosion, or loose components that affect roadworthiness.
How should a driver record the result of a satisfactory walk-around check where no defects are found?
Answer: Sign the defect report form to confirm the check was completed with no defects
Even when no defects are found, the driver must sign the defect report form to confirm the check was completed.
What should you do if you notice fuel leaking from the bus during your pre-drive check?
Answer: Report it as a critical defect — do not drive the vehicle
A fuel leak is a serious fire risk and a critical defect — the vehicle must not be moved.
During a walk-around check, you find a door seal is torn and the emergency door does not seal fully. Is the vehicle safe to drive?
Answer: No — emergency door defects are safety-critical and must be repaired before service
Emergency doors must be fully operational and properly sealed; a defect must be rectified before the vehicle enters service.
Which check verifies the steering is in good condition during a pre-drive inspection?
Answer: Checking for excessive free play in the steering wheel and ensuring it moves smoothly without tight spots
The steering check involves assessing free play (should not exceed the manufacturer's limit) and checking for smooth, even response.