Vehicle Checks Flashcards
6 cards from real PCV practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Vehicle Checks flashcards as text
During your daily walk-around check, you discover a crack in the windscreen within the driver's swept area. What should you do?
Answer: Report the defect immediately and do not drive until it is assessed or repaired
Any crack in the windscreen within the driver's swept area (the area cleared by the wipers) is a serious defect that must be reported immediately. It could impair your vision and is an MOT failure point.
What is the minimum legal tyre tread depth for a PCV in the UK?
Answer: 1.6 mm across the central three-quarters of the tread width
The minimum legal tyre tread depth for PCVs in the UK is 1.6 mm across the central three-quarters of the breadth of the tread, around the entire circumference of the tyre.
When checking the emergency exits on your bus, what must you ensure?
Answer: They are clearly marked, unobstructed, and can be opened from inside
Emergency exits must be clearly marked, completely unobstructed, and able to be opened from the inside by passengers. This is a legal requirement under the Public Service Vehicles (Conditions of Fitness) regulations.
How should you check the power steering on a PCV during your daily inspection?
Answer: Start the engine and check the steering turns freely in both directions with no unusual noises
To check power steering, start the engine and turn the steering wheel in both directions. It should move freely without excessive play, unusual noises, or heavy resistance. Also check the fluid level and for any leaks.
What should you look for when checking the bus suspension during your daily walk-around?
Answer: Check for air leaks from the air suspension bags, uneven vehicle height, and damaged components
Check for air leaks (listen for hissing), ensure the vehicle sits level (no leaning), inspect air bags for damage or wear, and check for broken or damaged suspension components including shock absorbers.
Why is it important to check all mirrors before starting your journey?
Answer: To ensure they are correctly positioned, clean, and undamaged so all blind spots are minimised
All mirrors must be correctly adjusted, clean, and free from cracks or distortion. Properly set mirrors minimise blind spots, which is critical for a vehicle as large as a bus where visibility is inherently limited.