Cargo Handling Operations Flashcards
6 cards from real Tanker Familiarization practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Cargo Handling Operations flashcards as text
A tanker is preparing to load a volatile cargo at a terminal equipped with a Vapour Emission Control System (VECS). During the pre-transfer check, what is the most critical parameter to verify regarding the ship and shore vapor connection to prevent structural damage to the cargo tanks?
Answer: The pressure settings of the ship's P/V valves and the shore's control system are properly aligned.
The alignment of pressure settings between the ship's P/V valves and the shore's VECS is critical. A terminal's VECS must be capable of maintaining the pressure in a tanker's cargo tanks between the lowest setting of the vacuum relief valves and the lowest setting of the pressure relief valves. If the shore system creates a vacuum or pressure outside the operational range of the ship's tank venting system, it can lead to severe structural damage like implosion or rupture. While other options are important safety checks, this alignment directly prevents catastrophic tank failure.
According to SOLAS regulations, what is the maximum permissible oxygen content, by volume, of the inert gas being delivered to the cargo tanks by the ship's IGS plant?
Answer: 5%
SOLAS Chapter II-2 requires that the inert gas system be capable of delivering inert gas with an oxygen content of not more than 5% by volume in the inert gas supply main to the cargo tanks. This low oxygen level ensures that the atmosphere inside the cargo tank is rendered non-flammable, well below the approximately 11% oxygen required to support hydrocarbon combustion.
Which of the following methods provides the most positive and secure segregation between two incompatible cargoes in adjacent pipelines on a chemical tanker?
Answer: Removing a spool piece (distance piece) from the line.
Positive segregation is achieved by physically removing a pipeline section, which creates an air gap between two different products. Removing a spool piece is a primary method for achieving this, making it physically impossible for cargo to mix due to a passing valve. While double block arrangements like two valves or two spectacle flanges offer good segregation, they are not as foolproof as a physical air gap because valves can still potentially leak.
During the pre-transfer conference, the Chief Officer and the terminal representative are finalizing the discharging plan. They note the vessel will be discharging from two tanks simultaneously to a single shore line. What is a critical operational limit that must be agreed upon and not exceeded to prevent pipeline or hose damage?
Answer: The agreed-upon maximum line pressure.
Agreeing on a maximum line pressure is crucial to ensure the integrity of the ship's manifold, the cargo hose, and the shore pipeline. Exceeding this pressure can lead to ruptures, cargo spills, and a major pollution incident. While other elements are part of the overall plan, managing and monitoring pressure is a primary safety concern for the containment and transfer system itself.
When planning to load multiple chemical parcels, what is the primary reference document used to determine if two cargoes are incompatible and should not be stowed in adjacent tanks?
Answer: A recognized chemical compatibility chart (e.g., US Coast Guard 46 CFR Part 150 chart).
While the SDS for each product contains reactivity data, a dedicated chemical compatibility chart, such as the one in the US Coast Guard's regulations (46 CFR Part 150), is the standard industry tool. These charts systematically cross-reference different chemical groups to identify dangerous combinations, guiding proper stowage and segregation to prevent hazardous reactions between different cargoes.
Which of the following is a critical precaution that must be taken *before* starting to wash a cargo tank that previously contained a volatile, flammable petroleum product?
Answer: Confirm the tank atmosphere is inerted to below 8% oxygen by volume.
According to the International Safety Guide for Oil Tankers and Terminals (ISGOTT), washing a tank that held a flammable cargo can generate static electricity and create a flammable vapor/air mixture. To prevent an explosion, the tank must first be made non-flammable by reducing the oxygen content to 8% or less by volume using the inert gas system. This is a fundamental safety requirement before introducing a potential ignition source like a water jet in a flammable atmosphere.