SRT Rescue Techniques and Operations 3

Question 1

What is the correct sequence for the 'reach, throw, row, go' rescue priority hierarchy?

Accepted Answer

Attempt contact rescues before water entry whenever possible

Answer

The hierarchy prioritizes rescuer safety by using shore-based or boat-based methods before placing a rescuer in the water, reducing multi-victim scenarios.

Question 2

A foot entrapment is best self-rescued by:

Accepted Answer

Rolling to the side and rotating the foot with the current to free it

Answer

Rolling downstream and rotating the foot with the current reduces hydraulic pressure on the trapped foot and aligns the ankle for extraction.

Question 3

When establishing a highline system across a river, the main line tension should be set to:

Accepted Answer

Approximately 15–20 degrees of sag to prevent catastrophic anchor failure

Answer

Excessive tension dramatically increases load on anchors and rope due to vector physics; a moderate sag of 15–20 degrees keeps forces manageable.

Question 4

During a contact rescue in swiftwater, a rescuer should approach a conscious victim from:

Accepted Answer

Downstream, using an eddy to intercept the victim

Answer

Approaching from a downstream eddy allows the rescuer to control position and intercept the victim without being pushed into them by the current.

Question 5

Which type of pin requires the MOST urgent rescue response in a swiftwater scenario?

Accepted Answer

A foot or body pin in a strainer with water flowing over the victim

Answer

A body pin in a strainer is immediately life-threatening because hydraulic forces can submerge the victim in seconds, leaving almost no time for rescue.

(SRT) Swiftwater Rescue Technician Certification Practice Test

(SRT) Swiftwater Rescue Technician Certification Practice Test

SRT Rescue Techniques and Operations 3