Practice Test Geeks(SPED) Society of Piping Engineers and Designers Certification Practice Test
← All SPED Flashcard Decks

Codes, Regulations & Safety Practices Flashcards

7 cards from real SPED practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Codes, Regulations & Safety Practices flashcards as text

  1. Which ASME code governs the design and fabrication of pressure vessels used in the chemical and petroleum industries?

    Answer: ASME Section VIII Division 1

    ASME Boiler and Pressure Vessel Code Section VIII Division 1 governs pressure vessels used in chemical and petroleum processing applications.

  2. Under OSHA's Process Safety Management (PSM) standard 29 CFR 1910.119, what is the threshold quantity of chlorine that triggers PSM requirements?

    Answer: 1,500 lbs

    OSHA PSM lists chlorine with a threshold quantity of 1,500 lbs, above which facilities must comply with 29 CFR 1910.119.

  3. ASME B31.3 Process Piping requires a minimum hydrostatic leak test pressure equal to how many times the design pressure?

    Answer: 1.5 times

    ASME B31.3 requires hydrostatic leak test pressure to be at least 1.5 times the design pressure.

  4. Which regulatory body enforces the National Emission Standards for Hazardous Air Pollutants (NESHAP) applicable to piping equipment leaks?

    Answer: EPA

    The EPA enforces NESHAP regulations under the Clean Air Act, including equipment leak standards for chemical process piping.

  5. In ASME B31.1 Power Piping, Category D fluid service is defined as a non-flammable, non-toxic fluid at what maximum temperature and gauge pressure?

    Answer: 300°F and 150 psig

    ASME B31.1 Category D fluid service is defined as non-flammable, non-toxic fluid at temperatures not exceeding 300°F and gauge pressures not exceeding 150 psig.

  6. The API 570 standard applies to the inspection, repair, alteration, and rerating of which type of piping systems?

    Answer: In-service petroleum refinery piping

    API 570 covers inspection, repair, alteration, and rerating of in-service piping systems used in petroleum refinery and chemical plant operations.

  7. Which document establishes the minimum safety requirements for the operation of natural gas distribution pipelines in the United States?

    Answer: 49 CFR Part 192

    49 CFR Part 192 is the federal regulation that establishes minimum safety standards for the transportation of natural and other gas by pipeline.