SPD Sterile Storage and Transport 2

Question 1

What environmental monitoring should be performed in sterile storage areas?

Accepted Answer

Continuous temperature and humidity monitoring with documented readings and defined action limits

Answer

Continuous environmental monitoring ensures storage conditions remain within parameters that support sterile packaging integrity.

Question 2

What is the correct procedure for transporting sterile items between buildings or to off-site locations?

Accepted Answer

Use sealed, protective transport containers and vehicles with climate control to maintain packaging integrity

Answer

Inter-facility transport requires sealed protective containers and climate-controlled vehicles to protect sterile items from environmental extremes and physical damage.

Question 3

How should recalled sterile items be managed in the storage area?

Accepted Answer

Immediately quarantine recalled items in a clearly marked segregation area and document the recall process

Answer

Recalled items must be immediately identified, physically separated from available inventory, and documented to prevent inadvertent use.

Question 4

What is the significance of positive air pressure in sterile storage areas?

Accepted Answer

Positive pressure prevents unfiltered air from flowing into the storage area, reducing airborne contamination risk

Answer

Positive air pressure ensures that clean filtered air flows out when doors open rather than allowing contaminated corridor air to flow in.

Question 5

How should implantable devices be managed differently in sterile storage compared to standard instruments?

Accepted Answer

Implants require separate tracking, biological indicator verification before release, and often dedicated secure storage

Answer

Implantable devices require enhanced tracking, mandatory BI verification before release, and often secure storage due to higher infection risk.

SPD - Sterile Processing Department Technician Certification Practice Test

SPD - Sterile Processing Department Technician Certification Practice Test

SPD Sterile Storage and Transport 2