SPC Radio Communications and ATC 2

Question 1

When making a position report at an uncontrolled airport, which information should a pilot broadcast FIRST?

Accepted Answer

Aircraft type, registration, and position

Answer

Position reports at uncontrolled airports should begin with aircraft type and tail number so other traffic can identify who is broadcasting.

Question 2

What does the term 'ATIS' stand for in aviation?

Accepted Answer

Automatic Terminal Information Service

Answer

ATIS stands for Automatic Terminal Information Service, which provides recorded weather and airport information updated hourly.

Question 3

A pilot receives the instruction 'Cleared to land, Runway 27, wind 250 at 12.' What should the pilot do immediately?

Accepted Answer

Acknowledge and read back the clearance

Answer

Pilots must always read back landing clearances to confirm receipt and understanding of the instruction.

Question 4

On which frequency should a pilot self-announce intentions at a non-towered airport that has a CTAF?

Accepted Answer

122.8 MHz or the published CTAF

Answer

Pilots should use 122.8 MHz or the published CTAF (Common Traffic Advisory Frequency) for self-announcements at non-towered airports.

Question 5

What is the meaning of a solid red light signal from the control tower to an aircraft on the ground?

Accepted Answer

Stop

Answer

A steady red light signal to an aircraft on the ground means STOP.

(SPC) Student Pilot Certificate Practice Test