Aircraft Systems and Performance Flashcards
6 cards from real SPC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Aircraft Systems and Performance flashcards as text
Which of the following are the four forces that act on an airplane in flight?
Answer: Lift, Weight, Thrust, and Drag
The four fundamental forces acting on an aircraft in flight are Lift, which counteracts Weight, and Thrust, which counteracts Drag. Lift is the upward force created by the wings, Weight is the force of gravity, Thrust is the forward force from the engine, and Drag is the resistance of the air.
A pilot is preparing for a takeoff from a high-elevation airport on a hot, humid day. What effect will these conditions have on aircraft performance?
Answer: Decreased performance due to high density altitude.
High elevation, high temperatures, and high humidity all contribute to a high density altitude. High density altitude means the air is less dense. This less dense air reduces engine power output, decreases lift, and consequently leads to a longer takeoff roll and a reduced rate of climb.
What is the primary purpose of deploying flaps during a landing approach?
Answer: To allow for a steeper approach to landing without increasing airspeed.
Extending flaps increases both lift and drag. This allows the pilot to fly a steeper approach angle for landing without the airspeed increasing, which is crucial for clearing obstacles and landing on a shorter runway.
The primary function of an aircraft's rudder is to control movement around which axis?
Answer: Vertical axis (yaw)
The rudder is a primary flight control surface that controls the rotation of the aircraft about its vertical axis. This motion is known as yaw.
In a piston-powered aircraft, what is the primary reason for a pilot to use carburetor heat?
Answer: To prevent or clear carburetor icing.
Carburetor heat is a system that directs hot air into the carburetor to prevent or melt ice that can form due to the pressure drop and fuel vaporization in the carburetor's venturi. Carburetor icing can restrict airflow and cause engine failure.
An altimeter is a flight instrument that measures an aircraft's:
Answer: Height above a specific pressure level.
An altimeter is essentially a sensitive barometer that measures atmospheric pressure. It is calibrated to show this pressure measurement as an altitude, typically height above Mean Sea Level (MSL), based on a standard pressure lapse rate.