Solidworks Test 5 — Questions and Answers
Question 1: In a SolidWorks drawing, what is a 'Broken-Out Section' view used for?
- Shows a full cross-section through the entire part
- Exposes interior details by removing a portion of the outer surface in a specified closed boundary (Correct answer)
- Projects the part onto an auxiliary plane
- Creates a detail view at an enlarged scale
Correct answer: Exposes interior details by removing a portion of the outer surface in a specified closed boundary
A Broken-Out Section removes material within a user-drawn spline boundary to reveal internal features without cutting the entire view.
Question 2: What does the 'Isolate' function do when right-clicking a component in a SolidWorks assembly?
- Suppresses the component permanently
- Hides all other components so only the selected ones are visible for focused editing (Correct answer)
- Removes the component from the assembly tree
- Locks the component's position
Correct answer: Hides all other components so only the selected ones are visible for focused editing
Isolate temporarily hides all unselected components, letting you focus on editing or inspecting the chosen component(s) without distraction.
Question 3: Which SolidWorks feature is designed specifically to create complex curved surfaces by blending between multiple profile sketches along one or more guide curves?
- Swept Boss/Base
- Lofted Boss/Base (Correct answer)
- Boundary Boss/Base
- Filled Surface
Correct answer: Lofted Boss/Base
Loft generates a solid or surface by transitioning through multiple profile cross-sections, optionally guided by curves for shape control.
Question 4: In SolidWorks Simulation, what is a 'fixture' used for?
- Defines the material properties of the model
- Constrains degrees of freedom on the model to simulate how it is held in the real world (Correct answer)
- Applies external loads such as pressure or gravity
- Generates the mesh for the finite element analysis
Correct answer: Constrains degrees of freedom on the model to simulate how it is held in the real world
Fixtures (boundary conditions) constrain translation and rotation on selected geometry to prevent rigid-body motion during the FEA solve.
Question 5: What advantage does using a SolidWorks 'Design Table' provide over manually editing configurations one at a time?
- It generates photorealistic renders of each configuration automatically
- It lets you create and control multiple configurations simultaneously through an embedded Excel spreadsheet (Correct answer)
- It links configurations to external simulation results
- It suppresses all patterns in lightweight configurations
Correct answer: It lets you create and control multiple configurations simultaneously through an embedded Excel spreadsheet
A Design Table uses an embedded Excel sheet where each row defines a configuration and columns control dimensions, feature suppression, and properties in bulk.
Question 6: When you apply the 'Mirror' feature to bodies in a multibody part, which option is required to create a separate, mirrored solid body rather than merging with the original?
- Merge solids
- Create copies (Correct answer)
- Knit surfaces
- Keep bodies
Correct answer: Create copies
Enabling 'Create copies' in the Mirror Body feature generates a new independent solid body that is a mirror of the selected body without merging.
Question 7: Which SolidWorks Routing add-in capability is specifically used to design piping and tubing systems within an assembly?
- SolidWorks Wiring
- SolidWorks Piping (Correct answer)
- SolidWorks Cabling
- SolidWorks Conduit
Correct answer: SolidWorks Piping
The SolidWorks Piping module within the Routing add-in automates the layout of pipe runs, fittings, and flanges using route points on connection components.
Solidworks Test 5
In a SolidWorks drawing, what is a 'Broken-Out Section' view used for?