Solidworks Surface Modeling 5

Question 1

What SolidWorks feature creates a surface at a constant distance from an existing surface, following its shape?

Accepted Answer

Offset Surface

Answer

Offset Surface generates a new surface body that is equidistant from the original surface at every point, preserving its contour.

Question 2

When would you use a Ruled Surface in SolidWorks?

Accepted Answer

To create a surface tangent or normal to a selected edge, useful for mold draft or packaging design

Answer

Ruled Surface generates a surface that extends from selected edges in a direction that is tangent, normal, or angled to the adjacent face, often used for parting surfaces and mold design.

Question 3

Which SolidWorks command converts a surface body into a solid by adding uniform wall thickness?

Accepted Answer

Thicken

Answer

The Thicken command takes an open or closed surface body and adds material in one or both directions to create a solid body with a specified thickness.

Question 4

What is 'surface curvature continuity' referred to as in mathematical/CAD terminology?

Accepted Answer

G2

Answer

G2 continuity means two surfaces share the same tangent direction (G1) AND the same radius of curvature at every point along their shared boundary.

Question 5

In a SolidWorks Sweep Surface, what role does the 'Guide Curve' serve compared to the 'Path'?

Accepted Answer

The path defines the trajectory the profile travels; guide curves control how the profile shape scales or morphs along the path

Answer

In a sweep, the path dictates the direction of travel while guide curves influence the profile's size, shape, or position as it moves along that path.

Solidworks Practice Test

Solidworks Practice Test

Solidworks Surface Modeling 5