Solidworks Sheet Metal and Weldments 4 — Questions and Answers
Question 1: Which SolidWorks tool converts a solid body into a sheet metal part by selecting one face as the fixed face?
- Insert Bends
- Convert to Sheet Metal (Correct answer)
- Flatten
- Rip
Correct answer: Convert to Sheet Metal
Convert to Sheet Metal allows you to select an existing solid body and designate a fixed face to apply sheet metal parameters and bend lines.
Question 2: In SolidWorks Weldments, what does the 'Trim/Extend' feature do?
- Adds fillet welds between members
- Cuts or extends structural members to fit at intersections (Correct answer)
- Reorders the weldment cut list
- Applies weld beads along a path
Correct answer: Cuts or extends structural members to fit at intersections
Trim/Extend modifies the ends of structural members so they meet cleanly at joints without overlapping or leaving gaps.
Question 3: What property of sheet metal controls the minimum inside radius applied to all bends in the part?
- Bend Allowance
- Default Bend Radius (Correct answer)
- K-Factor
- Thickness
Correct answer: Default Bend Radius
Default Bend Radius sets the minimum inside radius for bends and can be overridden on individual bend features.
Question 4: When creating a weldment structural member along a 3D sketch path with multiple segments, what option keeps all segments as one continuous structural member body?
- Merge arc segment bodies (Correct answer)
- Apply corner treatment
- New Group
- Align with start point
Correct answer: Merge arc segment bodies
The 'Merge arc segment bodies' option (or merge bodies option for colinear/tangent segments) combines connected segments into a single body rather than separate bodies.
Question 5: Which sheet metal feature creates a partial cut across the bend zone to allow the part to fold at a specific location without a full relief?
- Lofted Bend
- Sketched Bend (Correct answer)
- Break Corner
- Forming Tool
Correct answer: Sketched Bend
Sketched Bend adds a bend line directly on a flat face of the sheet metal part, creating a bend without a flanged feature.
Question 6: In a SolidWorks Weldment cut list, what triggers the system to automatically group bodies into the same cut list item?
- Same material only
- Same profile, length, and angle cuts (Correct answer)
- Same sketch path
- Same weld bead applied
Correct answer: Same profile, length, and angle cuts
Bodies are grouped into the same cut list item when they share identical profile type, length, and end cut angles, indicating they can be cut from the same stock.
Question 7: What is the purpose of the 'Rip' feature in SolidWorks Sheet Metal?
- Removes material along a bend to create relief
- Opens corners of a solid body so it can unfold flat (Correct answer)
- Creates a hem along an open edge
- Splits a sheet metal part into two bodies
Correct answer: Opens corners of a solid body so it can unfold flat
Rip creates gaps at edges or corners of a sheet metal part, allowing SolidWorks to unfold the geometry into a flat pattern.
Solidworks Sheet Metal and Weldments 4
Which SolidWorks tool converts a solid body into a sheet metal part by selecting one face as the fixed face?