Solidworks Part Modeling and Features 2

Question 1

Which SolidWorks feature removes material by rotating a closed sketch around an axis?

Accepted Answer

Revolve Cut

Answer

Revolve Cut removes material by spinning a sketch profile around a defined axis of revolution.

Question 2

What is the purpose of the 'Fillet' feature in SolidWorks?

Accepted Answer

Rounds selected edges with a specified radius

Answer

The Fillet feature rounds sharp edges or vertices with a specified radius to reduce stress concentrations.

Question 3

In SolidWorks, what does the 'Mirror' feature do when applied to a solid feature?

Accepted Answer

Reflects selected features about a plane or face to create a symmetrical copy

Answer

The Mirror feature creates a symmetrical copy of selected features, faces, or bodies about a chosen plane.

Question 4

Which SolidWorks feature creates a uniform array of holes or features in a straight-line arrangement?

Accepted Answer

Linear Pattern

Answer

Linear Pattern repeats selected features at equal spacing along one or two directions.

Question 5

What is a 'Rib' feature used for in SolidWorks?

Accepted Answer

Creating thin supporting walls between surfaces to add structural strength

Answer

The Rib feature extrudes a thin structural wall from an open sketch profile between existing surfaces.

Solidworks Practice Test