Safety Regulations and Compliance Flashcards
7 cards from real SMSTS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Regulations and Compliance flashcards as text
Under the Control of Noise at Work Regulations 2005, at what daily personal noise exposure level must employers provide hearing protection?
Answer: 80 dB(A) — the lower exposure action value
Employers must make hearing protection available at the lower exposure action value of 80 dB(A) and its use becomes mandatory at the upper level of 85 dB(A).
Which regulation requires employers to prevent or adequately control workers' exposure to hazardous substances on construction sites?
Answer: Control of Substances Hazardous to Health Regulations 2002 (COSHH)
COSHH requires employers to assess the risks from hazardous substances and implement controls to prevent or adequately control exposure.
A contractor receives a Prohibition Notice from an OSHA inspector. What does this legally require?
Answer: The activity must stop immediately and cannot resume until the notice is complied with
A Prohibition Notice requires immediate cessation of the specified activity and work may not resume until the inspector is satisfied that the risk has been controlled.
What does 'vicarious liability' mean in the context of construction site safety management?
Answer: An employer's legal responsibility for the acts or omissions of their employees during the course of employment
Vicarious liability means an employer can be held legally responsible for negligent acts committed by employees while carrying out their employment duties.
Under the Manual Handling Operations Regulations 1992, what is the first step employers must take to protect workers?
Answer: Avoid the need for hazardous manual handling operations so far as is reasonably practicable
The primary duty is to avoid hazardous manual handling entirely where reasonably practicable, before considering any other controls.
What is the key difference between a 'method statement' and a 'risk assessment'?
Answer: A risk assessment identifies hazards and evaluates risks; a method statement describes the safe working procedure
A risk assessment identifies what could go wrong and how likely it is; a method statement describes the step-by-step safe sequence of work, often referencing the risk assessment's controls.
Under OSHA standards, what is the minimum height at which fall protection is required for workers on construction sites?
Answer: 6 feet (1.8 m)
OSHA's construction fall protection standard (29 CFR 1926.502) requires fall protection when workers are exposed to fall hazards of 6 feet or more.