Practice Test Geeks(SMSTS) Site Management Safety Training Scheme Practice Test
← All SMSTS Flashcard Decks

Equipment and Tools Knowledge Flashcards

7 cards from real SMSTS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Equipment and Tools Knowledge flashcards as text

  1. What color coding system is widely used in the UK to identify the last quarter of electrical test for portable power tools?

    Answer: Colored cable ties or tags changed quarterly

    A colored tag or cable tie system is widely adopted on UK sites to visually indicate the period during which the tool was last PAT tested.

  2. A concrete pump boom suddenly loses hydraulic pressure. What is the immediate action the site manager should require?

    Answer: Stop all operations, evacuate the exclusion zone, and call a qualified engineer

    A boom losing pressure can collapse without warning; all personnel must clear the exclusion zone and a competent engineer must assess the fault before resumption.

  3. Under LOLER 1998, what is the minimum frequency for thorough examination of a mobile crane used for general construction lifting?

    Answer: Every 6 months

    LOLER requires lifting equipment used for lifting persons or in potentially dangerous circumstances to be thoroughly examined at least every 6 months.

  4. What is the primary risk of leaving a running generator unattended inside an enclosed site office or welfare cabin?

    Answer: Carbon monoxide poisoning from exhaust gases

    Petrol and diesel generators produce carbon monoxide, which is odorless and can rapidly reach fatal concentrations in enclosed spaces.

  5. A pedestrian-operated dumper is being used on a slope. Which hazard requires specific risk assessment and control?

    Answer: Overturning or runaway if the slope exceeds manufacturer limits

    Dumpers have maximum gradient ratings; exceeding these can cause overturning or loss of control, resulting in serious injury.

  6. Which statutory regulation primarily governs the safe use of woodworking and other fixed machinery on construction sites?

    Answer: Provision and Use of Work Equipment Regulations (PUWER) 1998

    PUWER 1998 covers all work equipment including fixed machinery, requiring it to be suitable, maintained, inspected, and used safely.

  7. What is a key indicator that a scaffold board is unfit for use and should be taken out of service?

    Answer: The board has a crack running across its width or missing more than 10% of its depth

    A cross-grain crack or significant section loss severely reduces load-bearing capacity and the board must be removed from service.