Personal Protective Equipment Flashcards
6 cards from real CSOC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Personal Protective Equipment flashcards as text
What is the mandatory minimum PPE required on all Singapore construction sites?
Answer: Safety helmet (hard hat) and safety footwear at minimum, with additional PPE based on specific hazards
All persons on a construction site must wear at least a safety helmet and safety footwear. Additional PPE such as goggles, gloves, hearing protection, and harnesses are required based on specific work hazards.
Who is responsible for providing PPE to construction workers in Singapore?
Answer: The employer must provide appropriate PPE free of charge and ensure it fits properly
Under the WSH (General Provisions) Regulations, employers must provide suitable PPE at no cost to employees, ensure proper fit, and train workers on correct usage and maintenance.
How often should safety helmets be replaced on Singapore construction sites?
Answer: According to the manufacturer's recommended lifespan (typically 2-5 years) or immediately if damaged, cracked, or after a significant impact
Safety helmets must be replaced according to the manufacturer's guidelines (usually 2-5 years), immediately after a significant impact, or when showing signs of deterioration such as cracks, dents, or UV damage.
When must hearing protection be provided on Singapore construction sites?
Answer: When noise levels exceed 85 dB(A) over an 8-hour time-weighted average
Under the WSH (Noise) Regulations, employers must provide hearing protection when workplace noise exceeds 85 dB(A) over an 8-hour TWA, and implement a hearing conservation programme.
What is the purpose of a high-visibility vest on a Singapore construction site?
Answer: To make workers visible to vehicle operators and equipment operators, reducing the risk of being struck
High-visibility vests make workers conspicuous on construction sites where vehicles and heavy equipment operate, significantly reducing the risk of struck-by accidents, especially in low-light conditions.
What type of safety footwear is required on Singapore construction sites?
Answer: Safety boots or shoes with steel toe caps and puncture-resistant soles that meet approved standards
Construction site footwear must have steel or composite toe caps to protect against falling objects and puncture-resistant soles to protect against nails and sharp objects on the ground.