Security Licence VIC Conflict Management and De-escalation 4 — Questions and Answers
Question 1: What record retention period applies to Conflict Management and De-escalation documents under WHS Regulations?
- No retention required
- Typically 5 years, or 30 years for health monitoring and asbestos records (Correct answer)
- 1 month
- Until the end of the project
Correct answer: Typically 5 years, or 30 years for health monitoring and asbestos records
Most WHS records must be kept for 5 years, with longer periods for specific records such as health monitoring (30 years) and asbestos.
Question 2: What is continuous improvement in Conflict Management and De-escalation management?
- Doing the same thing year after year
- Systematically reviewing performance, learning from incidents, and implementing improvements to prevent future harm (Correct answer)
- Cutting safety budgets annually
- Increasing work speed each quarter
Correct answer: Systematically reviewing performance, learning from incidents, and implementing improvements to prevent future harm
Continuous improvement involves ongoing evaluation and enhancement of safety practices based on monitoring, audits, incidents, and feedback.
Question 3: What is the significance of Australian Standards for Conflict Management and De-escalation?
- They are advisory only
- Many are referenced in legislation making compliance legally required, and they set minimum technical requirements (Correct answer)
- They are outdated
- They only apply to imported products
Correct answer: Many are referenced in legislation making compliance legally required, and they set minimum technical requirements
Australian Standards referenced in WHS Regulations become legal requirements and set the minimum technical benchmarks for compliance.
Question 4: What is the PCBU's obligation for worker training in Conflict Management and De-escalation?
- No obligation exists
- To provide information, training, instruction, and supervision adequate for the worker to perform the task safely (Correct answer)
- To provide a manual only
- To tell workers to be careful
Correct answer: To provide information, training, instruction, and supervision adequate for the worker to perform the task safely
The PCBU must ensure workers receive adequate information, training, instruction, and supervision appropriate to the nature of the work and risks.
Question 5: How should new Conflict Management and De-escalation risks be incorporated into existing safety systems?
- Ignore them
- Through review and update of risk assessments, procedures, training, and communication to all affected workers (Correct answer)
- Wait for the next scheduled review
- File them for future reference
Correct answer: Through review and update of risk assessments, procedures, training, and communication to all affected workers
New risks must be promptly incorporated into risk assessments, procedures, and communicated to all affected workers.
Question 6: What is the role of a WHS inspector regarding Conflict Management and De-escalation compliance?
- To do the work themselves
- To monitor compliance, investigate incidents, provide guidance, and issue improvement or prohibition notices (Correct answer)
- To manage the project
- To provide insurance
Correct answer: To monitor compliance, investigate incidents, provide guidance, and issue improvement or prohibition notices
WHS inspectors enforce legislation through monitoring, investigation, guidance, and enforcement notices.
Security Licence VIC Conflict Management and De-escalation 4
What record retention period applies to Conflict Management and De-escalation documents under WHS Regulations?