SCP-500

SCP-500 Test 2

Calculate the average rate of traffic for a router and track the interfaces that are polled using SNMP by Orion NPM every 5 minutes, with recent values of 1,000,000 and 2,000,000 octets.

26 Kbps

16 Kbps

1 Kbps

3 Kbps

Correct! Wrong!

The correct answer:
26 Kbps

In the calculation of Percent Utilization, which two variables are used? (Select two.)

Please select 2 correct answers

bits per second

configured bandwidth

interface discards

packets per second

Correct! Wrong!

The correct answer:
configured bandwidth
and
bits per second

You had to migrate Orion to a new server with a new IP address due to a server crash. Which two adjustments should you make to the new server and IP address to ensure that Orion works properly? (Select two.)

Please select 2 correct answers

change the IP address specified in the snmpd. conf file on the Orion server

update the destination IP address for Syslog and SNMP traps on your managed devices

update the access control lists (ACLs) that restrict management protocols

updates the source address for Net Flow packets exported to Orion

Correct! Wrong!

The correct answer:
update the access control lists (ACLs) that restrict management protocols
and
update the destination IP address for Syslog and SNMP traps on your managed devices

Your Internet connection is being monitored, and your ISP has assured you 512 Kbps. Your connection speed has been stable at 256 Kbps for a long time, but it has never exceeded this speed, according to historical data.
What exactly does this mean?

the NAT table is overloaded

the ISP has misconfigured the link.

QoS is dropping low priority traffic

the WAN router is misconfigured.

Correct! Wrong!

The correct answer:
the ISP has misconfigured the link.

To collect utilization statistics, which protocol should a network engineer enable on routers and switches?

SNMP

WMI

ICMP

SMTP

Correct! Wrong!

The correct answer:
SNMP

Numerous Orion NPM servers are now monitoring multiple locations from a single location in your current configuration. This results in erroneous data and increased WAN bandwidth usage. What are the two most effective approaches to dealing with this problem? (Select two.)

Please select 2 correct answers

deploy an additional Orion Poller

deploy an Orion Hot Standby

deploy Orion Enterprise Operations Console

deploy Orion NPMat each remote location

Correct! Wrong!

The correct answer:
deploy Orion NPMat each remote location
and
deploy Orion Enterprise Operations Console

How does the Orion Universal Device Poller (UnDP) keep track of statistics that aren't part of the standard Orion NPM MIB database?

by automatically searching the common MIB repositories and updating Orion

by manually associating the device'sOID to Orion

by manually compiling the MIB into the Orion MIB database

by keeping a copy of the device's MIB on the Orion NPM Server

Correct! Wrong!

The correct answer:
by manually associating the device'sOID to Orion

Which two performance metrics may a proper QoS implementation affect? (Select two.)

Please select 2 correct answers

latency

marking

jitter

shaping

Correct! Wrong!

The correct answer:
jitter
and
latency

Due to the large number of devices sending Syslog messages, a network engineer notices that the Syslog server's database is rapidly growing in size. What should the engineer do to keep database growth under control?

configure the devices and the Syslog server to use SNMPv3

configure the Syslog server to capture SNMP traps instead of Syslog

configure the devices and the Syslog server to use TCP-based Syslog

configure the Syslog server to discard unwanted messages

Correct! Wrong!

The correct answer:
configure the Syslog server to discard unwanted messages

SCP-500 Test 1
0% In the calculation of Percent Utilization, which two variables are used? (Select two.) Please…

SCP-500 Test 2

Calculate the average rate of traffic for a router and track the interfaces that are polled using SNMP by Orion NPM every 5 minutes, with recent values of 1,000,000 and 2,000,000 octets.

In the calculation of Percent Utilization, which two variables are used? (Select two.)

You had to migrate Orion to a new server with a new IP address due to a server crash. Which two adjustments should you make to the new server and IP address to ensure that Orion works properly? (Select two.)

Your Internet connection is being monitored, and your ISP has assured you 512 Kbps. Your connection speed has been stable at 256 Kbps for a long time, but it has never exceeded this speed, according to historical data. What exactly does this mean?

To collect utilization statistics, which protocol should a network engineer enable on routers and switches?

Numerous Orion NPM servers are now monitoring multiple locations from a single location in your current configuration. This results in erroneous data and increased WAN bandwidth usage. What are the two most effective approaches to dealing with this problem? (Select two.)

How does the Orion Universal Device Poller (UnDP) keep track of statistics that aren't part of the standard Orion NPM MIB database?

Which two performance metrics may a proper QoS implementation affect? (Select two.)

Due to the large number of devices sending Syslog messages, a network engineer notices that the Syslog server's database is rapidly growing in size. What should the engineer do to keep database growth under control?

Related Post

Your Internet connection is being monitored, and your ISP has assured you 512 Kbps. Your connection speed has been stable at 256 Kbps for a long time, but it has never exceeded this speed, according to historical data.
What exactly does this mean?