Emissions Control & Environmental Compliance Flashcards
7 cards from real SAW practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Emissions Control & Environmental Compliance flashcards as text
In a SAW operation using fluoride-containing flux, which health hazard from fluoride fume must be specifically monitored per NIOSH recommendations?
Answer: Fluorosis and respiratory irritation
Fluoride fumes from SAW flux can cause fluorosis (bone and teeth damage) and acute respiratory irritation, requiring specific air monitoring.
Which ventilation configuration is considered MOST effective for controlling fume emissions directly at a SAW torch?
Answer: Local exhaust ventilation (LEV) with capture hood near the weld zone
Local exhaust ventilation captures fumes at the source before they disperse into the worker's breathing zone, making it the most effective control method.
Under the Clean Air Act, a 'major source' of hazardous air pollutants (HAPs) is defined as one emitting at or above:
Answer: 10 tons per year of any single HAP or 25 tons per year of combined HAPs
Under CAA Section 112, a major source emits ≥10 tons/year of any single HAP or ≥25 tons/year of all HAPs combined, triggering MACT standards.
A SAW facility needs to dispose of used grinding wheels and wire brush debris containing chromium. The FIRST step is to:
Answer: Conduct TCLP testing to determine if it is a characteristic hazardous waste
Toxicity Characteristic Leaching Procedure (TCLP) testing determines whether chromium-containing debris exceeds EPA regulatory limits for hazardous waste classification.
What does 'Best Available Control Technology' (BACT) require for new SAW facilities in Prevention of Significant Deterioration (PSD) permit areas?
Answer: Case-by-case review to apply the maximum degree of emission reduction achievable
BACT requires a case-by-case determination of the maximum achievable emission reduction considering energy, economic, and environmental factors for new or modified sources.
In SAW, ozone generation is minimal compared to open-arc processes primarily because:
Answer: The flux blanket shields the arc from atmospheric oxygen and UV radiation
The granular flux completely covers the arc, blocking UV radiation that generates ozone and limiting air contact that would otherwise produce ozone.
Which document must a SAW facility obtain before installing new emission control equipment such as a baghouse filter system?
Answer: Air quality construction permit (pre-construction permit)
Most states require a pre-construction (air quality construction) permit before installing new pollution control equipment to ensure it meets applicable emission standards.